Attaching the Battery Pack. Uniden Voyager, VOYAGER - VHF

VOYAGER.QX 11/19/2 2:19 PM Page 9

1 Place the battery pack onto the back of the radio. It will only fit in one way.

2 Snap the battery release clip until it clicks. Be sure the battery pack fits tightly against the VOYAGER’s body.

1 Hold the beltclip in the direction as follows.

2 Apply it to the hanger piece on the back of the radio. Then slid it up.

3 You will hear a click. The beltclip is firmly attached.

4 To take the beltclip off the radio, turn it and slid it up.

Contacts