Features and panel items. Sigma KAMESAN KS-342, KS-342

KS-342

Features and panel items

For the most part, the explanations given for the individual parts of the KS-342 will allow you to operate the mixer effectively. You should therefore read this part of the manual carefully in order to understand the many features and operations possible with the unit.

Left side (viewed from front)

This section is chiefly the inputs to the mixer:

������� ���������������

�

�

�

� � �

�

�

�

�

� �

�

�� ���

���

���

���

����

���������

�����

�������

������

������

����������

������������

��������������

INPUTS 1 through 4

Connect the microphones or line level sources to these XLR jacks.

INPUTS 1+2

This XLR-5 jack is used to connect a stereo microphone to the 1 and 2 inputs. The wiring is: 1= ground, 2=L

+, 3=L –, 4=R +, 5=R –.

Battery locking lever Pull

down to release the battery pack

Coaxial power supply

Connect a suitable power supply (tip negative, between 10 V and 15 V, approximately 0.5 A).

DC 12 V OUT

This connector is used to supply external power to other equipment.

AUX IN

This connector is used to connect an auxiliary input, such as a camera’s audio signal, etc.

Aux level control and routing switch

The level control is used to set the level of the input aux signal when it is routed to the output busses.

9