advertisement
▼
Scroll to page 2
of
24
KS-342
Other parameters
Microphone power
LCF (low-cut filter)
Oscillator
Compressor
P-48V (maximum power 10 mA)
A-B 12V (maximum power 30 mA)
20 Hz — 200 Hz, continuously variable, –12 dB/ octave
1 kHz (±10%)
Threshold level
Attack time
+3/+6/+9/+12 dB
2 ms (approx)
Release time
Ratio
300 ms (approx)
2:1 (approx)
Audio performance
Frequency response
Noise level
MAIN OUT & SUB OUT 30 Hz — 40 kHz (within 1 dB)
MIC (–70)
LINE (+4)
< –54 dB (22 kHz LPF/RMS)
< –70 dB (22 kHz LPF/RMS)
MONI
Total Harmonic Distortion (THD)
< –65 dB (22 kHz LPF/RMS)
<0.1% (50 Hz — 15 kHz
+4 dBm)
18
advertisement
Related manuals
Frequently Answers and Questions
What type of power sources can the Sigma KS-342 mixer use?
The mixer can run on standard manganese, alkaline, nickel-cadmium, or nickel-hydride batteries, or on an AC adaptor that provides 10-15V DC at 500mA with a tip-negative connection.
What type of microphones can be used with the mixer?
Only microphones that are designed to IEC 268-15A standards should be used with the mixer.
How many battery holders does the mixer come with?
One BP-3/8 battery holder for dry cell batteries is included with the mixer.
What additional accessories can be used with the mixer?
Additional battery holders, power adaptors, and expansion units like the KS-6001 sub-mixer and the KS-6002 EQ/compressor are available for purchase.
How can the mixer be attached to its carrying case?
The mixer's side strap holders should be attached to the retaining panels in the case, and the case clips should fit over the lip at the top of the mixer's front panel.
advertisement