- PVID. EnGenius EGS5110P, EGS2110P, EGS2108P

PVID

When an Untagged packet enters a Switch port, the PVID

(Port VLAN ID) will be attacted to the untagged packet and forwarded to a VLAN specified ID part of the PVID.

Note: To enable PVID functionality, the following requirements must be met:

• All ports must have a defined PVID.

• If no other value is specified, the default VLAN PVID is used.

• If you want to change the port’s default PVID, you must first

create a VLAN that includes the port as a member.

Port: Shows the port number.

Trunk: Shows the trunk number (if any are defined for this port).

PVID: Select one or more ports and then click here to select a PVID.

Apply: Click APPLY to update the system settings.

29