External A/V Source Setup. LG Electronics MU-50PM10, MU-42PM11, MU-42PM12X, MU-42PM20, MU-50PM10, MU-50PM11, MU-50PM20, 4412A/TF

Add to My manuals
40 Pages

advertisement

External A/V Source Setup. LG Electronics MU-50PM10, MU-42PM11, MU-42PM12X, MU-42PM20, MU-50PM10, MU-50PM11, MU-50PM20, 4412A/TF | Manualzz

Installation

External A/V Source Setup

How to connect

1. Connect the provided BNC-RCA adapter to the monitor’s

VIDEO INPUT.

2. Connect the audio and video cables from the external equipment's output jacks to the monitor input jacks, as shown in the figure.

When connecting the monitor to external equipment, match the jack colors (Video = yellow, Audio Left = white, and

Audio Right = red).

How to use

1. Select the input source with using the INPUT SELECT button on the remote control. (If connected to VIDEO INPUT, select Video input source).

2. Operate the corresponding external equipment. Refer to external equipment operating guide.

Y P

B

P

R

COMPONENT INPUT

R L

AUDIO INPUT S-VIDEO

R L

AUDIO INPUT

(MONO)

VIDEO INPUT

R AUDIO L VIDEO

( ) R ( ) ( ) L ( )

EXTERNAL SPEAKER

AC INPUT

Camcorder

Video Game Set

How to connect

1. Connect the DVD video outputs (Y, P

B

, P

R

) to the COM-

PONENT (Y, P

B

, P

R

) INPUT jacks on the Monitor and connect the DVD audio outputs to the AUDIO INPUT jacks on the monitor, as shown in the figure.

2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the monitor and connect the DVD audio outputs to the AUDIO INPUT jacks on the monitor, as shown in the figure.

RGB OUTPUT

Y P B P R

COMPONENT INPUT

R L

AUDIO INPUT S-VIDEO

R L (MONO)

AUDIO INPUT VIDEO INPUT

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the INPUT SELECT button on the remote control to select Component. (If connected to S-VIDEO, select the

S-Video external input source.)

3. Refer to the DVD player's manual for operating instructions.

or

B R

(R) AUDIO (L)

S-VIDEO

(R) AUDIO (L)

( )

R

( ) ( )

EXTERNAL SPEAKER

L

( )

AC INPUT

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the monitor

Y P

B

P

R

Video output ports on DVD player

Y

Y

Y

Y

Pb

B-Y

Cb

P

B

Pr

R-Y

Cr

P

R

DVD

Owner’s Manual 13

advertisement

Related manuals