2.2 Rear Panel of MHD44TP. PTN MHD44TP

HDBaseT Matrix Switchers 4x4

With the front control panel, the switcher could be control directly and rapidly by pressing the buttons under below format.

 “Input Channel” + “AV” + “Output Channel”

 “Input Channel”: Fill with the number of input channel to be controlled.

 “Output Channel”: Fill with the number of output channels to be controlled.

2.2 Rear Panel of MHD44TP

No. Name

① IR ALL IN

Figure 2 Rear Panel of MHD44TP

Description

IR control signal input port, connect with IR receiver, pass through to all the HDBaseT ports to control the remote devices.

Type A female HDMI connectors. ②

HDMI

INPUTS

③ IR OUT

④ OUTPUTS

Connect with IR transmitter, to send out the IR signal from the HDBaseT port. These IR OUTs make up a IR matrix with the IR INs on the HDBaseT receivers, and all can be switched

synchronously

with the AV signal, or separately switching.

IR IN: Connect with IR receiver, fixed IR input for the output, cannot be switched. It makes up an IR transmission with the IR OUT on the corresponding

HDBaseT receiver.

HDMI: Split HDMI output for local monitoring.

COAX: HDMI de-embedded digital audio output.

HDBaseT: Works with receivers using HDBaseT technology, such as TPHD402R, TPHD402PR. It can

PTN Electronics Limited 3 www.PTN-electronics.com