Programming Instructions
Follow this procedure if you need to program your phone’s phone number.
Note: Programming is normally done by a trained technician at the site of purchase. Users should not make changes other than ones in the following procedure.
Before programming, ask your service provider for your:
• 10-digit MIN (Mobile Identification Number)
• Carrier System ID (a one- to five-digit number)
Press
1 # , the Carrier System ID number,
# , * ,
N
2 0 , 0 , 0 , 0 , 0 , 0
(this is the security code that is in the phone when it is shipped from the factory)
3 OK ( + )
To enter programming mode enter the security code
4
S
5 CHANGE ( + ) submit the security code scroll to MIN open the MIN display
6 keypad keys for the 10-digit MIN enter the new MIN
7 OK ( + )
8 DONE ( ) store the new MIN exit programming mode
149
