6.3 Connecting with an HDMI cable. Digitalbox IMPERIAL HD 2 basic

6. CONNECTING THE RECEIVER

6.3 Connecting with an HDMI cable

Plug the HDMI cable into the „HDMI“ HDMI socket on the receiver.

Connect the HDMI cable to the TV set.Read and follow the operating instructions for the TV set.

If you want to connect a video recorder, plug a SCART cable into the „VCR“ SCART socket on the receiver.

Connect the SCART cable to the video recorder. Read and follow the operating instructions for the video recorder.

If you want to connect a stereo system, plug the Cinch (RCA) connector of the Cinch cable into the „AUDIO R“ and „AUDIO L“ sockets on the receiver.

Note that the SCART cable and the HDMI cable do not come with the receiver. It is not possible to operate the receiver concurrently over the SCART and HDMI connections.

A signal is supplied either at the SCART output or at the HDMI output.

A video recorder connected to the VCR SCART connection cannot be played over the

HDMI connection.

Connection diagram

GB

15 DVB-S Receiver