Additional options. Miele G 686, G 689 Plus

Operating the dishwasher

Additional options

"Top Solo" (19)

The "Top Solo" additional function is recommended when there is only a small amount of crockery and cutlery to clean. With this function the majority of the water is directed to the top and middle spray arms in the dishwasher.

This means that the water jets are aimed at items in the upper basket and the cutlery tray if the dishwasher has one.

As the middle spray arm also directs water downwards, lightly soiled plates or platters can be placed in the bottom basket, and cutlery may be placed in the cutlery basket if there are large spaces between items. Do not place dishes, bowls or other hollow containers in the bottom basket.

Because smaller amounts of crockery are being washed the amount of detergent recommended by the manufacturer can be reduced to approx. 2/3 of the total amount for the full load. Make sure, however, when reducing the amount dispensed that the cleaning result is not affected.

Using "Top Solo" will also save water and energy.

For example, if using this function with the "Economy" programme only 11 litres of water and approx. 0.75 kWh of electricity are used.

The "Top Solo" function can be selected with all programmes.

36

^ Switch the dishwasher on using the

"On/Off" button (13).

The "Start" indicator light (20) will flash.

^ Turn the programme selector (17) clockwise or anti-clockwise to the required programme.

The running time of the selected programme appears in the time display

(14) in hours and minutes.

^ Press the "Top Solo" button (19).

The "Top Solo" indicator light (19) will come on.

The running time of the selected programme changes in the time display

(14). The electronic unit is taking the additional function "Top Solo" into account.

The "Delay Start" function can now be selected (see next page).

^ Press the "Start" button (20).

The programme cycle begins. The

"Start" (20), "Pre-wash" or "Main wash"

(15) and "Top Solo" (19) indicator lights will come on.

The additional function is deleted from memory at the end of the programme cycle.

Operating the dishwasher

37