Dropdown: This type of menu is identified by up and down arrows next to the dropdown menu to indicate that additional options are available. Tap on the menu to highlight it, and tap on the arrows attached to the menu to cycle through the options.
Checkbox: This box allows you to select or deselect an option. To select or deselect a checkbox, tap the stylus in the checkbox. A checkmark is displayed in an active checkbox.
Radio buttons: These buttons allow you to choose from a number
of options. For example, in the sample screen under section 3.5 on page 49, you can choose to
‘Obtain an IP address via DHCP’ or
‘Specify an IP address’. Tap on a radio button to activate the option next to it.
Buttons: This type of button allows you to ‘Save’, ‘Delete’ and so on the options you’ve chosen in a dialog box. Tap on the button you want to execute.
Saving Your Choices: Once you’ve made all your changes, tap on the OK button to save your changes and exit the window.
Note: A dialog box item that is displayed in grey text indicates that it is not currently available.
4. Scanner Specifications
4.1 SE 1200HP, LR & ALR
Parameter
Type
SE 1200HP
Laser Class 2
Light Source
Visible laser diode
650 nm
Output Power 0.83 mW
Scan Patterns Linear
SE 1200LR
Laser Class 2
Visible laser diode
650 nm
1.33 mW
Linear
SE 1200ALR
Laser Class 2
Visible laser diode
650 nm
1.35 mW
Linear
50 Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide
