DAB TUNER OPERATIONS. JVC KD-SX924R, KD-SX925R, kd sx 925 r, KD-SX909R, kd sx 909 r, kd-sx979r

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio Broadcasting) tuner KT-DB1500 with your unit.

If you have another DAB tuner, consult your JVC IN-CAR ENTERTAINMENT dealer.

• Refer also to the Instructions supplied with your DAB tuner.

What is DAB system?

DAB is one of the digital radio broadcasting systems available today. It can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures and data.

In contrast to FM broadcast, where each programme is transmitted on its own frequency,

DAB combines several programmes (called “services”) to form one “ensemble.”

With the DAB tuner connected with this unit, you can enjoy these DAB services.

Tuning into an ensemble and one of the services

A typical ensemble has 6 or more programmes (services) broadcast at the same time. After tuning into an ensemble, you can select a service you want to listen to.

4

3

1,2

Before you start....

Press FM/AM/DAB briefly if you are selecting CD, CD changer or LINE IN as the source.

1

DAB

FM/AM

Select the DAB tuner.

Each time you press and hold the button for more than 1 second, the DAB tuner and the FM/AM tuner are alternately selected.

DAB FM/AM

2

FM/AM

DAB

Select the DAB band (DAB1, DAB2, or DAB3).

You can select any one of DAB1, DAB2, and DAB3 to tune into an ensemble.

D1

(DAB 1)

D2

(DAB 2)

D3

(DAB 3)

To be continued on the next page

41

EN41-46.KD-SX979R[E]/f 41 00.1.20, 2:08 PM

3

To search ensembles of higher frequencies.

Start searching an ensemble.

When an ensemble is received, searching stops.

To search ensembles of lower frequencies.

4

5

∞

MO

RND

RPT

Select an service you want to listen to.

To stop searching before an ensemble is received, press the same button you have pressed for searching.

To change the display information while tuning into an ensemble

Normally service name is shown on the upper part of the display.

If you want to check the ensemble name or its frequency, press DISP.

Each time you press the button, the following information appears for a while on the upper part of the display.

Service name Ensemble name Channel number Frequency

To restore the FM/AM tuner

Press and hold FM/AM/DAB for more than 1 second again.

To tune in a particular ensemble without searching:

1 Press and hold FM/AM/DAB for more than 1 second.

2 Press FM/AM/DAB repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

3 Press and hold ¢ or 4 for more than 1 second.

4 Press ¢ or 4 repeatedly until the ensemble you want is reached.

• If you hold down the button, the frequency keeps changing until you release the button.

42

EN41-46.KD-SX979R[E]/f 42 00.1.20, 2:09 PM