Using HDMI control. Sony 40S28XX, KDL-32T2600, KDL-32S28xx, KDL-40S28, KDL-40T26xx, KDL-32T26xx, KDL-32S2800, KDL-32T26, KDL-40T26, KDL-32S28

010COV.book Page 18 Friday, July 20, 2007 11:07 AM

Using the Tools menu

Press TOOLS to display the following options when viewing pictures from connected equipment.

Options

Close

Description

Closes the Tools menu.

Picture Mode (except

PC input mode)

See page 20.

Display Mode (in PC input mode only)

See page 20.

Sound Effect

Speaker

See page 22.

See page 23.

PIP (in PC input mode only)

See page 18.

H Centre (in PC input mode only)

See page 25.

V Lines (in PC input mode only)

See page 25.

Sleep Timer (except

PC input mode)

See page 25.

Power Saving See page 24.

To view two pictures simultaneously

– PIP (Picture in Picture)

You can view two pictures (PC input and TV programme) on the screen simultaneously.

Connect a PC (page 16), and make sure that images from a PC appear on the screen.

~

You cannot display resolutions higher than WXGA (1280 ×

768 pixels).

1

Press TOOLS to display the Tools menu.

2

Press F / f to select “PIP”, then press .

The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner.

You can use F / f / G / g to move the TV programme screen position.

3

Press number buttons or PROG +/- to select the TV channel.

To return to single picture mode

Press RETURN.

z

You can switch the audible picture by selecting “PC Sound/

TV Sound” from the Tools menu.

Using HDMI control

The HDMI control function allows equipment to control each other using HDMI CEC (Consumer

Electronics Control) specified by HDMI.

You can perform interlocked control operations between Sony HDMI control compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables.

Be sure to correctly connect and set the compatible equipment to use the HDMI control function.

To connect the HDMI control compatible equipment

Connect the compatible equipment and the TV with an

HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the audio output socket of the TV and the audio system. For details, see page 16.

To make the HDMI control settings

HDMI control must be set on both the TV side and the connected equipment side. See HDMI Set-up

(page 27) for the TV side settings. See the operating instructions of the connected equipment for setting details.

HDMI control functions

• Turns the connected equipment off interlocked with the TV.

• Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play.

• If you turn on a connected audio system while the

TV is on, the input switches to the audio from the audio system.

• Adjusts the volume and mutes the sound of a connected audio system.

18 GB