Documentation. Xerox 115/115MX, 100/100MX, 135/135MX, 180 EPS, 155/155MX, 180MX, 180/180MX
Add to my manuals
158 Pages
advertisement
Introduction
• Initial capital and angle brackets: Within procedures, the names of keys are shown with an initial capital and within angle brackets (for example, press <Enter>).
• Angle brackets: Variable information, or the position of a specified argument in the command syntax, appears in angle brackets (for example, List Fonts <pattern>).
• Fixed pitch font: Within procedures, text and numbers that you enter are shown in a bold, fixed pitch (“computer”) font (for example, enter privilege operator ).
• Messages that appear on the controller screen are shown in the medium weight fixed pitch font (for example, Online
Gateway disabled ).
• The word “enter” within procedures: The two-step process of keying in data and pressing <Enter> (for example, enter y).
• Italics: Document and library names are shown in italics (for example, the Xerox DocuPrint NPS/IPS Guide to Managing
Print Jobs).
Variable elements in a command or directory path are also shown in italics (for example, var/spool/XRXnps/ filename).
• Vertical bars: Alternatives to specified arguments are separated by vertical bars (for example, Set Time <Time |
Remote Host Name | IP Address>).
NOTE: Notes are hints that help you perform a task or understand the text.
CAUTION: Cautions alert you to an action that could damage hardware or software.
WARNING: Warnings alert you to conditions that may affect the safety of people.
Documentation
This section lists related publications. xii Operator Guide
Introduction
DocuPrint 100/115/135/155/180 EPS documentation
The following documents contain information on the Xerox
DocuPrint 100/115/135/155/180 EPS:
• Customer Documentation CD
• Xerox DocuPrint 100/115/135/155/180 EPS Operator Guide
• Xerox Document Services Platform Using LCDS Print
Description Language
• Xerox DocuPrint 100/115/135/155/180 EPS Installation
Planning Guide
• Xerox DocuPrint 100/115/135/155/180 EPS NPS/IPS
Extension Operations Guide
• Xerox DocuPrint EPS Font Reference Manual
• Xerox DocuPrint 100/115/135/155/180 EPS Operator Quick
Reference Card
• Xerox DocuPrint 100/115/135/155/180 EPS Customer
Information Quick Reference Card
• Xerox DocuPrint 100/115/135/155/180 EPS Job Submission
Quick Reference Card
• Xerox Document Services Platform System Guide
Operator Guide xiii
Introduction xiv Operator Guide
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 Laser safety
- 7 Ozone information: U. S. only
- 7 Operation safety: U. S.
- 8 Operation safety: Europe
- 9 Warning markings
- 9 Electrical supply
- 9 Ventilation
- 10 Operator accessible areas
- 10 Maintenance
- 10 Before cleaning your product
- 10 CE mark: Europe only
- 11 Radio and telecommunications equipment directive (Europe only)
- 12 For further information
- 13 About this guide
- 13 Contents
- 13 Conventions
- 14 Documentation
- 15 DocuPrint 100/115/135/155/180 EPS documentation
- 17 Functional overview
- 18 Host connectivity options
- 19 Data formats supported
- 19 Stock specifications
- 22 Printing process and job flow
- 24 Printer overview
- 26 Printer components
- 32 Printer options
- 34 Paper paths
- 36 Controller overview
- 37 Controller components
- 42 Online and offline interfaces
- 43 Moving the controller
- 45 Tape drives overview
- 46 Paper sizing and print speed
- 47 Long and short edge feeding
- 47 Paper width and throughput speed (LCDS printing only)
- 49 Paper size and pitch mode minimum and maximum
- 51 Feed direction for standard paper sizes
- 55 Controlling the printer
- 55 Interrupting printing
- 55 Resuming printing
- 55 Powering on the printer
- 55 Powering off the printer
- 56 Powering off the printer immediately
- 56 Adjusting the registration transport roll levers for heavy paper
- 57 Loading paper
- 62 Unloading a stacker bin
- 67 Starting, stopping, and rebooting the system
- 67 Powering on the controller
- 67 Powering on the printer
- 68 Holding queues
- 68 Releasing queues
- 68 Rebooting the system (warm boot)
- 69 Performing a deferred shutdown and reboot
- 69 Performing an immediate shutdown and reboot
- 70 Restarting the DocuSP software
- 70 Powering off the system
- 73 Operating the 18/36 track tape drive
- 73 Powering on the tape drive
- 74 Powering off the tape drive
- 75 Placing the tape drive online
- 75 Loading a tape
- 76 Unloading a tape
- 77 Guidelines for handling cartridges
- 78 Setting file protection
- 79 Printing the online Help documentation
- 81 Paper care
- 81 Storing paper
- 83 Conditioning paper
- 83 Paper curl
- 84 Using consumables
- 84 Adding fuser agent
- 87 Replacing the dry ink waste container
- 91 Replacing the dry ink cartridge
- 93 Using the custom transfer assist blade
- 94 Cleaning the system and its components
- 95 Cleaning the 18/36-track cartridge tape drive
- 95 Cleaning the 26-track cartridge tape drive
- 96 Cleaning the DVD drive
- 96 Cleaning the diskette drive
- 96 Cleaning the sensors and the reflecting surfaces
- 102 Cleaning the display
- 102 Cleaning the exterior surfaces of the system
- 103 Undeclared faults
- 103 Problem classifications
- 104 Troubleshooting client problems
- 104 Troubleshooting Graphical User Interface (GUI) problems
- 105 Troubleshooting print quality problems
- 106 Resolving font problems
- 107 Troubleshooting job flow problems
- 107 Troubleshooting job integrity problems
- 108 Troubleshooting PDL problems
- 110 Troubleshooting process problems
- 111 Troubleshooting productivity and performance problems
- 112 Troubleshooting problems with saving jobs
- 112 Crash recovery
- 112 Streaming mode
- 114 Spooling mode
- 115 Clearing online print data
- 115 Online gateway faults/submitting a job from the host
- 116 Obtaining information about a job
- 117 Data type on the Online Manager window
- 117 Streaming queue release setup
- 117 Incorrect printer state on host
- 117 Clearing paper jams
- 118 Aids to paper jam clearance
- 118 Clearing paper jams in all printer areas
- 119 Checking job integrity following a paper jam
- 120 Clearing paper jams in printer areas 2 through 20
- 131 Clearing a paper jam in the bypass transport
- 133 Clearing a misfeed (feeder tray fault)
- 135 Troubleshooting frequent misfeeds (processor feeder trays)
- 138 Incorrect paper size message
- 138 Generating a test page
- 139 Troubleshooting stacker problems
- 139 Troubleshooting paper curl problems
- 139 Checking paper curl
- 142 Adjusting the decurler lever
- 143 Troubleshooting the 36-track tape drive
- 143 Performing basic recovery
- 143 Troubleshooting initial program load (IPL) failure
- 144 Solving other cartridge tape drive problems
- 147 Calling for service
- 149 Available supplies
- 153 How to order supplies