Setting the Green Button Function
197
You can assign one of the following functions to the | button and access the function by simply pressing the button while shooting.
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
Resets the values being adjusted. (default setting)
Sets the Custom Image settings. (p.213)
Displays the Optical Preview. (p.139)
Displays the Digital Preview. (p.140)
Sets the Digital Filter. (p.155)
Cross Processing
Sets the Cross Processing. (p.216)
One Push File
Format
Temporarily changes the file format. Simultaneously saves an image in both JPEG and RAW format, regardless of the
[File Format] setting. You can set whether to apply the setting to only one image or not, and select the file format
when the | button is pressed. (p.198)
1
Select [Green Button] in the [A Rec. Mode 4] menu and
press the four-way controller (5).
The [Green Button] screen appears.
2
Press the four-way controller
(5).
Green Button
Green Button
Action in M Mode
E-dial in Program
P LINE
P SHIFT
6
MENU
198
3
Use the four-way controller
(23) to select a function to
assign to the | button, and
press the 4 button.
Green Button
RAW
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
Cross Processing
One Push File Format
MENU Cancel OK OK
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
6
Setting the One Push File Format
When [One Push File Format] is assigned to the | button, specify the function settings.
1
Select [One Push File Format] in Step 3 of “Setting the
Green Button Function”.
2
Use the four-way controller (23) to select [Cancel after 1 shot].
3
Use the four-way controller
(45) to select O or P.
Green Button
RAW One Push File Format
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU
O
P
The recording format returns to the original file format after a picture is taken. (default setting)
The setting is canceled when the following operations are performed.
- the | button is pressed again
- the Q button or 3 button is pressed
- the main switch is turned off
- the mode dial is turned
4
Use the four-way controller (23) to choose a file format.
The left side is the [File Format] setting and the right side is the file format when the | button is pressed.
5
Press the four-way controller
(5), and use the four-way
controller (23) to select a file
format when the | button is pressed.
Green Button
RAW One Push File Format
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU Cancel OK OK
6
Press the 4 button.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
199
6
