Developing RAW Images
259
You can convert captured RAW files into JPEG files.
Only RAW files captured with this camera can be edited. RAW files and JPEG files captured with other cameras cannot be edited on this camera.
Developing One RAW Image
1
Select a RAW image in Playback mode.
2
Press the four-way controller (3).
The playback mode palette appears.
3
Use the four-way controller (2345) to select h (RAW
Development) and press the 4 button.
The screen to select a development method is displayed.
4
Use the four-way controller (23) to select [Developing a Single
Image] and press the 4 button.
Developing a Single Image
Developing Multiple Images
8
MENU
The parameters recorded in the image file appear.
You can select a different image by turning the e-dial.
To specify the parameters before
developing, refer to “Specifying the
Parameters” (p.262).
MENU OK
OK OK
12
M
ISO
NR
100-0001
260
5
Press the 4 button.
The save confirmation screen appears.
6
Use the four-way controller (23) to select [Save as] and press the
4 button.
The RAW image is developed and saved as a new image.
RAW JPEG
Saves the image as a new file
Save as
Cancel
MENU OK OK
7
Use the four-way controller (23) to select [Continue] or [Exit].
Select [Continue] to edit other images.
Image developed and stored.
Continue developing?
8
Continue
Exit
OK OK
8
Press the 4 button.
If you select [Continue] in Step 7, the screen for selecting the parameter in Step 4 appears again.
Developing Multiple RAW Images
You can develop multiple RAW images with the same settings.
1
Select [Developing Multiple Images] in Step 4 on p.259 and
press the 4 button.
The multi-image display screen appears.
Refer to p.224 for details on operations in the multi-image display screen.
2
Use the four-way controller (2345) to select the RAW
images to be developed and press the 4 button.
261
3
Press the M button.
The development confirmation screen appears.
4
Use the four-way controller (23) to select [Develop images as shot] or [Develop images with modified settings].
To change parameters, select [Develop images with modified settings]. For
details, refer to “Specifying the
Parameters” (p.262).
The screen to select a parameter appears.
5
Use the four-way controller
(2345) to set [Recorded
Pixels] and [Quality Level].
MENU
Develop images as shot
Develop images with modified settings
OK OK
12
M
OK MENU
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller (23) to select [Save as] and press the
4 button.
The selected RAW images are developed and saved as new images.
RAW JPEG
Selected images are saved as new files
Save as
Cancel
MENU OK OK
8
262
8
Specifying the Parameters
Specify the parameters for developing RAW images.
The following parameters can be changed.
Parameter
Recorded Pixels
Quality Level
Custom Image
White Balance
*1
Sensitivity
High-ISO NR
Shadow Correction
Distortion Correction
*2
Lat-Chromatic-Ab Adj
*2
Color Space
Value
E (4288×2848)/J (3936×2624)/
P (3072×2048)/i (1728×1152)
C (Best) / D (Better) / E (Good)
Bright/Natural/Portrait/Landscape/Vibrant/
Muted/Bleach Bypass/Reversal Film/
Monochrome
F (Auto)/G (Daylight)/H (Shade)/
^ (Cloudy)/JD (Fluorescent Light Daylight
Color)/JN (Fluorescent Light Daylight
White)/JW (Fluorescent Light Cool White)/
J L (Fluorescent Light Warm White)/
I (Tungsten Light)/L (Flash)/f/
K (Manual)
-2.0 to +2.0
Auto/Off/Low/Medium/High
Off/Low/Medium/High
Off/On
Off/On sRGB/AdobeRGB
*1 This cannot be set for RAW files taken in Multi-exposure mode.
*2 This can be selected only when a compatible lens is attached. (p.211)
Page
p.192
p.193
p.213
p.200
–
p.100
p.208
p.211
p.211
p.205
1
Press the four-way controller
(23) in Step 4 on p.259 to
choose the parameter you want to change.
12
M
ISO
NR
MENU OK 100-0001
2
Use the four-way controller (45) to change the value.
Use the four-way controller (5) to display the setting screen for White
Balance and Custom Image.
3
Press the 4 button.
The save confirmation screen appears.
4
Use the four-way controller (23) to select [Save as] and
press the 4 button.
The RAW image is developed and saved as a new image.
• You cannot save the background image and use Digital Preview with White
Balance and Custom Image.
• When the white balance is set to K (Manual), press the mc button to display the measuring screen.
263
8
264
Memo
9
Changing Additional
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ...................... 266
Formatting an SD Memory Card ....................... 268
Setting the Beep, Date and Time, and Display
Language ............................................................ 269
Adjusting the Monitor and the Menu Display .. 274
Setting the Folder/File Number ......................... 279
Selecting the Power Settings ............................ 281
Setting the Photographer Information ............. 283
Setting the DPOF Settings ................................ 285
Correcting Defective Pixels in the CMOS
Sensor (Pixel Mapping) ..................................... 287
Selecting Settings to Save in the Camera
(Memory) ............................................................. 288
