About the PSE-McBasic. IMC Networks PSE-McBasic, TX/FX-SM1310/PLUS-ST, PSE-McBasic, TX/SSFX-SM1550/LONG-SC, PSE-McBasic Series

IMC Networks PSE-McBasic, TX/FX-SM1310/PLUS-ST is a media converter with a variety of features that make it ideal for use in a wide range of applications. It can be used to extend the range of an Ethernet network, or it can be used to power devices that are located far from a power outlet.

The PSE-McBasic is a 10/100 Mbps media converter that supports both copper and fiber optic connections. It is also compliant with the IEEE 802.3af Power over Ethernet (PoE) standard, which allows it to power devices such as IP cameras, VoIP phones, and wireless access points.

The PSE-McBasic is equipped with a number of features that make it easy to use and manage. These features include:

PDF

Dokument

Reklamë

About the PSE-McBasic

The PSE-McBasic functions as a fiber-to-twisted pair media converter, as well as a

802.3af-compliant, Power Sourcing Equipment (PSE), delivering power to a Powered

Device (PD) through the UTP data cable. Deploying a PSE-McBasic media converter supporting the Power over Ethernet standard is the solution for both extending the access point from the network core as well as powering the end-device at the access point.

The PSE-McBasic is fully compliant with IEEE 802.3u 100 Mbps Fast Ethernet and

IEEE 802.3af Power over Ethernet standards, performing a single conversion between

100Base-TX twisted pair and 100Base-FX multi-mode or single-mode fiber. Singlestrand fiber versions are also available. Each PSE-McBasic includes one RJ-45 connector for the twisted pair port and ST or SC connectors for the fiber port. The

PSE-McBasic is 1U high and includes diagnostic LEDs as well as a universal (100/240

V AC) power supply.

About Power over Ethernet and PSE

Power over Ethernet technology allows the PSE-McBasic to function as Power

Source Equipment (PSE) by distributing an electrical current across existing copper data cabling. If the connected unit requires power and is 802.3af compliant, the

PSE detects it and supplies power. LEDs on the PSE-McBasic indicate the amount of power being supplied to the Powered Device (PD) as well as if the PSE-McBasic is over temperature or over current or has an open circuit. PSE functionality is enabled by default.

NOTE

Although the PSE-McBasic automatically detects Powered Devices (PDs), and only supplies power when connected to an 802.3af-compliant PD, set the PSE switch to OFF when connecting to a non-802.3af-compliant device.

Installing the PSE-McBasic

While the PSE-McBasic comes ready to install, all configuration changes should be made after installation. To install the PSE-McBasic first make sure that it is placed on a suitably flat surface. Attach the cables between the PSE-McBasic and each device that will be interconnected. Then, plug it into a reliable, filtered power source.

INSTALLATION TIP

Several versions of the PSE-McBasic support single-strand fiber operation. Since

Përshëndetje! Unë jam një chatbot AI i trajnuar posaçërisht për t'ju ndihmuar me About the PSE-McBasic. IMC Networks PSE-McBasic. Unë e kam shqyrtuar plotësisht dokumentin dhe mund t'ju ndihmoj të gjeni informacionin e saktë që ju nevojitet ose të shpjegoj përmbajtjen në terma të qartë dhe të thjeshtë. Pavarësisht nëse jeni duke kërkuar udhëzime mbi veçori specifike, hapa zgjidhjeje problemesh ose përdorim të përgjithshëm, mos ngurroni të bëni pyetjet tuaja. Sa më shumë detaje të jepni rreth shqetësimeve ose nevojave tuaja, aq më saktë dhe efektivisht mund t'ju ndihmoj!

Asistenti po shkruan

Asistenti nuk është në tastierë. Ju lutemi, provoni përsëri më vonë.

Tabela e përmbajtjes

Duket se keni arritur në një dokument që është shkruar në disa gjuhë, duke përfshirë një që nuk është gjuha juaj amtare. Mund të përdorni lidhjet e mëposhtme për të fshehur përkohësisht faqet pa gjuhën që preferoni.