Making Connections. HP CW450t Digital Camera, CW450t, CW-450t

66

Setting Memory Kit

This utility formats the internal memory (or memory card) and erases all stored images and data. If the images were saved in the internal memory, when inserting memory card into the camera, you can use Copy to Card function in order to copy all images from the internal memory into memory card.

Available settings are:

• Format.

Tap to format currently used memory.

• Copy to Card.

Tap to copy all files stored in the internal memory to the memory card.

• If the photos were saved in the internal memory when inserting memory card into the camera, you can use Copy to Card function in order to copy all photos from the internal memory into memory card.

• If there is a memory card inserted in the memory slot, the camera automatically saves all files to the memory card.

• If there is no memory card or the internal memory is empty, the function is disabled.

Copy to Card

Reset All

Use this function to reset the camera to its factory settings.

However, the following settings are exceptions and not affected by Reset.

• Date and Time

• Language

• TV Out

• Custom White Balance data

67

Making Connections

You can connect your camera to: TV, computer, or a printer.

Connecting the Camera to a TV

You can play back your images on a TV screen. Before connecting to any video devices, make sure to select NTSC/

PAL to match the broadcast standard of the video equipment you are going to connect to the camera.

To connect your camera to a TV:

1. Turn on the camera.

2. Set the TV out to match the TV’s video out format. See

“Setting TV Out” on page 66.

3. Connect the USB/AV 3-in-1 cable (not included) to the USB port on the bottom of your camera.

4. Connect the other end of the cable to the TV’s AV input port.

5. The LCD monitor turns black and all images and videos are displayed on the TV.

Connecting the Camera to a PC

You can transfer photos, videos and audio files to your PC.

1. Connect one end of the USB cable to an available USB port on your computer

2. Connect the other end of the USB cable to the USB terminal on the camera.

3. Turn on the camera.

4. The USB mode menu appears on the screen. Tap to select the onscreen “Computer” button.

68 69

68

5. The PC starts to detect the connection while the LCD monitor appears “Connecting…”

6. Connection established after “ PC MODE” appeared on the

LCD monitor

7. Access the files in the camera by your PC.

• The camera’s internal memory and memory card would display as removable drives in PC.

• After the connection, no image is displayed on the LCD monitor.

Connecting the Camera to a Printer

You can print your photos directly using a PictBridge compatible printer.

1. Turn on your Printer. Check that the printer is turned on, there is paper in the printer, and there are no printer error messages.

2. Connect one end of the USB cable to the printer while the other end to USB terminal on the camera.

3. The USB mode menu appears on the screen. Select “ Printer” by using the or key and press the button.

4. Enter the print mode and print the selected images.

5. For details on the following page “

Menu”.

Setting the Print Mode

69