RAM Disk. KYOCERA FS-3540MFP, FS-3640MFP, FS-3140MFP+
Add to My manuals87 Pages
KYOCERA FS-3140MFP+ is a powerful and versatile multifunction printer perfect for home or office use. With its advanced features and capabilities, the FS-3140MFP+ can help you save time and money while increasing your productivity.
Key Features:
- Print, copy, scan, and fax capabilities
- Fast print speeds of up to 35 pages per minute
- High-resolution printing of up to 1200 x 1200 dpi
- Large paper capacity of up to 550 sheets
- Built-in duplex printing for automatic double-sided printing
- Network connectivity for easy sharing
- PCL and PostScript support for compatibility with a wide range of software
- Optional wireless connectivity for printing from anywhere
advertisement
![RAM Disk. KYOCERA FS-3540MFP, FS-3640MFP, FS-3140MFP+ | Manualzz RAM Disk. KYOCERA FS-3540MFP, FS-3640MFP, FS-3140MFP+ | Manualzz](http://s1.manualzz.com/store/data/002403555_1-a9d0de99e367fb5414be32e086259bfa-360x466.png)
Device Settings
1 Install optional DIMM memory in the printing system.
2 In Device Settings > Memory, type or select the amount of total installed memory by clicking the up and down arrows until the text box shows the correct number of megabytes (MB).
If your printing system includes the Auto Configure feature, you can use it to obtain information about the memory size.
RAM Disk
The RAM disk functions as a virtual hard disk, saving print requests into the printing system’s memory. Because the RAM disk is temporary memory, all data stored there is lost when the power is turned off.
In a client/server environment, this feature is unavailable to a client logged in as a restricted user.
Note: For some models, RAM disk requires optional printing system memory.
Once installed, set the RAM disk in Device Settings > Device
options.
If selected, the Ignore application collation feature in the Compatibility
Settings dialog box lets the driver control collation. RAM disk can then increase the print speed of collated multiple copies by sending the print job just once.
Setting RAM Disk
You can set the RAM disk to save print requests into the printing system’s memory.
1 At the printing system's operation panel, turn on RAM disk and set its size.
2 In Device Settings > Device options, select RAM disk.
3 In the RAM disk text box, type or select the desired RAM disk size. Click the up and down arrows until the text box shows the correct number of megabytes
(MB) available physically on the operation panel.
The maximum RAM disk size depends on the amount of installed memory.
Administrator Settings
Administrator Settings lets you set options that include controlling accessibility, displaying features in the interface and setting a password to control access to the Administrator Settings options. Selections vary according to printing system model.
In a client/server environment, this feature is unavailable to a client logged in as a restricted user.
General
An administrator can control the display of the Quick Print tab, and other miscellaneous settings, including password and SNMP settings.
2-3 User Guide
KX DRIVER
Device Settings
Show Quick Print Tab
This option lets you control the display of the Quick Print tab. You can define basic print options into group profiles for improved accessibility.
With a clear check box for Show Quick Print tab, the tab does not appear in the Printing Preferences dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Show Quick Print tab.
With a selected check box for the Show Quick Print tab, the tab appears in the
Printing Preferences dialog box. When you select the Show Quick Print tab check box, you can access additional check boxes:
Hide other tabs displays only the Quick Print tab to the user.
Set Quick Print tab as default opens to this tab when you access Printing
Preferences.
Hide Edit Quick Print control prevents users from customizing the Quick
Print tab.
Send Count Information
This option lets you embed count information in the print job, which can be used by some applications for accounting purposes. Count information includes the number of copies produced as well as duplex printing, multiple pages per sheet, color mode, color page count, and paper size values.
When PDF is selected in the PDL settings dialog box, only color page count information is sent with PDF.
To enable this feature, in Device Settings > Administrator Settings >
General, select Send Count information.
Send Application Name
This option lets you send the application name with a print job, so that a different printing process is used for each application. Some third party print accounting programs use this information to calculate print totals based on application type.
This option is unavailable when PDF is selected in the PDL Settings dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Send Application name.
Associate Profile with Application
This option lets you set all printing from each installed application to use the same driver settings as defined in a profile. Before using this feature:
A profile must be created in the Profiles dialog box, accessed from any
Printing Preferences tab.
An association must be created between a profile and an application in the
Application Based Printing dialog box, accessed from the Profiles dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Associate Profile with application.
Password Protect Administrator Settings
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. If
2-4
Device Settings
2-5 selected, this setting prompts you to enter a password and confirm the password. This password protection blocks access to all Administrator
Settings options.
Setting the Administrator Password
You can set a password to prevent unauthorized changes in the Administrator
Settings dialog box.
1 In Device Settings > Administrator Settings > General, select Password
protect administrator settings.
2 In the Password dialog box, enter a password, using at least 4 and no more than 16 characters. Reenter the password in Confirm password and click OK.
Clearing the Administrator Password
You can remove the administrator password.
1 In Device Settings, select Administrator.
2 In the Enter Password dialog box, type the password and click OK.
3 In the Administrator Settings dialog box, clear the Password protect
administrator settings check box and click OK.
SNMP
Simple Network Management Protocol (SNMP) is a set of rules that govern the management of network devices, such as printing systems. These settings determine the level of security when using the Auto Configure feature, and prevent unauthorized printing to the SNMPv3 printing system. SNMP settings must be set in the printer driver and in the printing system’s Command Center.
The following options are available:
SNMPv1/v2c
This option ensures successful Auto Configure communication using Read
community name and Write community name.
SNMPv3
This option ensures secure Auto Configure communication using a user name and password. Authentication and privacy options are available by selecting Settings.
Apply to other models
This option displays a list of installed printing systems to apply the selected settings.
You can select options for secure communication with the printing system.
Authentication
This option provides an algorithm to check that a transferred file has arrived intact. Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA1) are hash algorithms used to authenticate packet data.
MD5
User Guide
advertisement
Key Features
- Business Laser Mono printing
- 1800 x 600 DPI
- Printing colours: Black
- A4 40 ppm
- Mono copying Colour scanning
- Direct printing
- USB port Ethernet LAN
- Internal memory: 1024 MB Built-in processor PowerPC 464 800 MHz
- 26.4 kg
Related manuals
Frequently Answers and Questions
How do I set up the wireless connection on my FS-3140MFP+?
What is the maximum paper size that the FS-3140MFP+ can handle?
Can I use the FS-3140MFP+ to print on special media, such as envelopes or labels?
advertisement
Table of contents
- 7 Preparing to Install the Driver
- 7 Selecting an Installation Method
- 8 Installing Utilities
- 8 Upgrading Driver Components
- 8 Express Installation
- 8 Installing in Express Mode
- 10 Custom Installation
- 10 Installing in Custom Mode with a Network Connection using Discover
- 11 Installing in Custom Mode with a USB Connection using Discover
- 12 Installing in Custom Mode with a Network Connection using Custom Select
- 14 Installing in Custom Mode with a USB Connection using Custom Select
- 15 Optional Printer Components
- 15 Installing Optional Printer Components
- 15 The Add Printer Wizard
- 15 Installing a Printer Driver in Windows 7 and Windows Vista
- 16 Installing a Printer Driver in Windows XP
- 16 Printer Driver Settings Access
- 16 Changing the Default Driver Settings
- 18 Accessing Device Settings
- 18 Device Options
- 18 Setting Device Options
- 18 Auto Configure
- 19 Enabling Auto Configuration
- 19 Memory
- 19 Setting the Memory
- 20 RAM Disk
- 20 Setting RAM Disk
- 20 Administrator Settings
- 20 General
- 21 Show Quick Print Tab
- 21 Send Count Information
- 21 Send Application Name
- 21 Associate Profile with Application
- 21 Password Protect Administrator Settings
- 22 Setting the Administrator Password
- 22 Clearing the Administrator Password
- 22 SNMP
- 22 SNMPv3 Options
- 23 Selecting SNMP Settings
- 23 Lock Settings
- 24 Lock Settings Options
- 24 User Login
- 25 User Login Options
- 25 Printing with User Login
- 26 Job Accounting
- 26 Job Accounting Options
- 27 Printing with Job Accounting
- 27 User Settings
- 27 Identification
- 28 Setting User Identification
- 28 Units
- 28 Selecting a Unit of Measurement
- 28 Language Preference
- 28 Setting Language Preference
- 28 PDL (Page Description Language)
- 29 PDL Options
- 30 PDL Settings
- 30 Selecting a PDL
- 30 PDF Options
- 32 Printing and Saving to PDF
- 32 XPS Driver
- 33 Compatibility Settings
- 33 Media Source Enumeration
- 33 Setting Media Sources
- 33 Ignore Application Collation
- 33 Selecting Printer Driver Collation
- 34 Combine Source and Media Type Lists
- 34 Creating a Combined Source List
- 34 Removing a Plug-in
- 35 Quick Print Options
- 35 Common Printing Options
- 36 Collate
- 36 Duplex Printing
- 37 Multiple Pages per Sheet
- 37 Edit Quick Print
- 37 Editing Quick Print Options
- 37 Profiles
- 38 Selecting a Profile
- 38 Saving a Profile
- 39 Editing a Profile
- 39 Importing a Profile
- 39 Exporting a Profile
- 40 Application Based Printing
- 40 Adding an Association
- 40 Editing an Association
- 42 Basic Settings
- 43 Source and Media Types
- 43 Print Size and Page Size
- 44 Creating a Custom Page Size
- 44 Printing with Custom Size Pages
- 44 Duplex Printing
- 45 Printing in Duplex Mode
- 45 Collate
- 46 Printing Collated Documents
- 46 Quality
- 46 Print Preview
- 46 Previewing a Print Job
- 47 Kyocera Logo
- 47 Displaying Version Information
- 47 Displaying Plug-in Information
- 48 Multiple Pages per Sheet
- 48 Printing Multiple Pages per Sheet
- 49 Scaling
- 49 Setting Scaling on the Page
- 49 Gutter
- 49 Creating a Gutter
- 50 Booklet
- 50 Printing a Booklet
- 50 Poster
- 51 Printing a Poster
- 52 Print Quality and Custom Quality
- 52 Selecting Print Quality
- 53 Selecting EcoPrint
- 53 Half Speed Mode
- 53 Fonts
- 53 Font Settings
- 54 Selecting Font Settings
- 54 Font Substitution
- 54 Setting Font Substitution
- 55 Disable Device Fonts
- 55 Disabling Device Fonts
- 55 Graphics
- 55 Selecting Graphics Settings
- 55 Pattern Scaling
- 56 Inversion Settings
- 56 Optimization Settings
- 57 CIE Optimization
- 57 Halftone Screen
- 57 Setting the Halftone Screen
- 58 Adjusting Grayscale
- 58 Text and Graphics Effects
- 60 Cover Mode
- 60 Printing Covers
- 61 Cover Mode Options
- 63 Choosing Cover Media
- 64 Page Insert
- 64 Printing Page Inserts
- 65 Page Insertion Options
- 65 Transparency Interleaving
- 66 Inserting Backing Sheets Between Transparencies
- 67 Job Storage (e-MPS)
- 67 Job Storage (e-MPS) options
- 68 Proof and Hold
- 68 Printing a Proof and Hold Job
- 68 Private Print
- 69 Storing a Private Print Job
- 69 Job Name
- 69 Don’t Use Application Name
- 69 Overwrite Job Name
- 70 Selecting a Job Name
- 71 Prologue/Epilogue
- 71 Selecting a Prologue/Epilogue File
- 71 Editing a Prologue/Epilogue File
- 72 Deleting a Prologue/Epilogue File
- 72 Assigning a Prologue/Epilogue File
- 72 Unassigning a Prologue/Epilogue File
- 72 Specifying the Insertion Point
- 73 Watermark
- 73 Adding or Editing a Watermark
- 74 Selecting Pages for Watermark
- 75 Security Watermark
- 76 Adding or Editing a Security Watermark
- 77 Adjusting Security Watermark Calibration
- 77 Selecting Pages for Security Watermark
- 78 Status Monitor
- 78 Selecting Status Monitor Options
- 79 Setting Status Monitor Preferences
- 80 EMF Spooling
- 80 Selecting EMF Spooling
- 80 Enable Client Profile