Developing Multiple RAW Images. Pentax 15624, 15635, 15646, 15668, 15667, 15698, K-30 + WR 18 - 55mm, 15679, K-30 + DAL 18-55WR, 15656

e_kb524_84percent.book Page 198 Friday, June 15, 2012 12:13 PM

198

6

Developing Multiple RAW Images

You can develop multiple RAW images with the same settings.

1

Select [Developing multiple images] in Step 3 on p.196, and

press the 4 button.

Images are displayed in [4 Thumbnail Display], [9 Thumbnail Display],

[16 Thumbnail Display] or [36 Thumbnail Display] (the display style that was selected last).

2

Select the RAW images to be developed.

Available operations

Four-way controller

(2345)

4 button

Moves the selection frame.

Confirms/cancels the image selection.

Rear e-dial (S) Displays the selected image in the single image display.

Turn the front e-dial (R) to display the previous or next image.

3

Press the M button.

The development confirmation screen appears.

4

Use the four-way controller (23) to select [Develop images as shot] or [Develop images with modified settings], and press the 4 button.

To change parameters, select [Develop images with modified settings].

MENU OK

e_kb524_84percent.book Page 199 Friday, June 15, 2012 12:13 PM

5

Use the four-way controller

(2345) to set [JPEG Recorded

Pixels] and [JPEG Quality].

When [Develop images as shot] is selected in Step 4, select W, X, Y or Z for

[JPEG Recorded Pixels].

When [Develop images with modified

settings] is selected, refer to p.197 to

MENU OK change other parameters. All images are developed with the same settings.

6

Press the 4 button.

The save confirmation screen appears.

7

Use the four-way controller (23) to select [Save as], and press the 4 button.

The selected RAW images are developed and saved as new JPEG images.

199

6