Tools. Ubiquiti Networks Aircam 3 Pack, airCam MINI, AIRCAM

airCam ™ User Guide

Tools

Ping

The Ping tool is used to check the preliminary link quality and packet latency estimation between two network devices using ICMP packets.

Chapter 3: Using the Camera Configuration Interface

Network Ping

Select Destination IP A remote system IP can be selected from the list which is generated automatically or can be specified manually.

Packet Count Enter the number of packets to send for the ping test.

Packet Size The size of the ICMP packets can be specified in this field.

Start The test is started using this button.

Packet loss statistics and latency time evaluation is provided after the test is completed.

Traceroute

The TraceRoute tool allows tracing the hops from the device to a selected outgoing IP address. It should be used for finding the route taken by ICMP packets across the network to the Destination host.

Destination Host Enter the IP address of the destination host to which you want to find the route.

Resolve IP Addresses Resolution of the IP addresses

(symbolically rather than numerically) can be enabled by selecting this option.

Start The test is started using this button.

Ubiquiti Networks, Inc.

6