164
K-50_ENG.book Page 164 Tuesday, June 4, 2013 10:35 AM
Customizing the Button/E-dial Functions
Functions can be assigned to the front/rear e-dial, V/Y button, and =/L button.
The current functions assigned to the buttons/dials can be checked with guide display.
5
Setting the E-dials Operation
For each exposure mode, you can select the parameters for when the front and rear e-dials are turned and | button is pressed.
1
Select [E-Dial Programming] in the [A Rec. Mode 4] menu, and press the four-way controller (5).
The [E-Dial Programming 1] screen appears.
2
Use the four-way controller (23) to select an exposure mode.
Turn the rear e-dial (S) to display the [E-Dial Programming 2] screen.
1 2
MENU
3
Press the four-way controller (5).
The screen for the selected exposure mode appears.
K-50_ENG.book Page 165 Tuesday, June 4, 2013 10:35 AM
165
4
Press the four-way controller (5), and use the four-way controller
(23) to select the desired setting.
The following settings can be selected for each exposure mode.
Exposure
Mode e
K b c
Front E-dial
(R) b c m e SHIFT
–
– o e SHIFT o m o b o
– c m c b
– b m o c m b o b c
– c m c o
Rear E-dial
(S) c b e SHIFT m
– o
– o e SHIFT o m
– b
MENU
|
Button
}e
–
–
–
– o AUTO o AUTO
–
–
–
– o AUTO o AUTO
}e e LINE e LINE
–
–
– e LINE e LINE
–
–
OK
(default setting)
(default setting)
(default setting)
(default setting)
5
K-50_ENG.book Page 166 Tuesday, June 4, 2013 10:35 AM
166
5
Exposure
Mode
L
/a p
C
Front E-dial
(R) b
Rear E-dial
(S) c
|
Button c b e LINE b SHIFT c SHIFT
–
– c o c c
– c o
–
–
–
–
Depends on the [Exposure Setting] (p.131)
of the [C Movie 1] menu.
(default setting)
(default setting)
(default setting) b
: Change shutter speed c: Change aperture value o: Change sensitivity m
: Adjust EV compensation value }e: Return to e eLINE: Program line e
SHIFT: Program shift –: Not available
5
Press the 4 button.
6
Press the 3 button.
The screen that was displayed in Step 2 appears again.
Repeat Steps 2 to 6 to change the settings of other exposure modes.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
