Using the P-TTL Auto Flash. Pentax K50 + SIGMA 18-200, K50 + TAMRON 18-200 XR DI, K-50 + 18-270MM F/3.5-6.3 ED SDM, K50 + SIGMA 18-250 MACRO, K-50 + SMC DA 17-70 f/4 SDM, K50 + 18-270 SDM, K-50 + 18-55 DAL WR + TAMRON 70-300 Di LD, K-50 + 18-55 DAL WR + SD 4GB, K-50 + TAMRON 17-50 XR DI, K-50 + SIGMA 17-70 CONTEMPORARY

K-50_ENG.book Page 246 Tuesday, June 4, 2013 10:35 AM

246

Using the P-TTL Auto Flash

You can use the P-TTL auto flash with an AF540FGZ, AF360FGZ,

AF200FG or AF160FC flash unit.

1

Remove the cover of the hot shoe, and attach the external flash.

2

Turn on the camera and the external flash.

3

Set the external flash mode to [P-TTL].

4

Make sure that the external flash is fully charged, and then take a picture.

The b will light in the viewfinder or Live View screen when the flash is ready (fully charged).

•

For details such as operation method and effective distance, refer to the external flash manual.

•

Never press the E button when any external flash unit is attached to the camera. The built-in flash will hit the external flash. If you want to use both at once, set the wireless mode or connect them using the extension cord.

(p.250)

9