K-50_ENG.book Page 220 Tuesday, June 4, 2013 10:35 AM
220
2
Press the four-way controller (2) to select [Reset], and press the 4 button.
The settings are reset, and the screen that was displayed before selecting the menu item appears again.
7
Checking the Camera Version Information
You can check the version information for software (firmware) in the camera. If an update file for the firmware is released, you can update the camera to the latest firmware version.
Visit our website for more information and procedural details regarding updates.
1
Select [Firmware Info/Options] in the [R Set-up 4] menu, and press the four-way controller (5).
The firmware version for the camera is displayed on the [Firmware Info/Options] screen.
At this point, if an update file is saved on your SD Memory Card, you can run the update.
MENU
2
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
•
You cannot restore a camera to its previous firmware version after updating it.
•
Before running the update, be sure to save the data on your SD Memory Card to a computer or other location.
•
When the battery level is low, [Not enough battery power remaining to update the firmware] is displayed on the monitor. Install a fully charged battery, or use the optional AC adapter kit.
