3.3. Electrical connection. Beko ASL141S, ASD241B American Fridge Freezer, ASL141, ASD241S, ASD241B, ASD241B NPWTD, ASL141B, ASD241, ASD241X American Fridge Freezer, ASD241X

Installation

• The specified voltage must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

B

B

WARNING: Damaged power cable must be replaced by the

Agents.

Authorised Service

WARNING: If the product has a failure, it should not be operated unless it is repaired by the Authorised Service

Agent! There is the risk of electric shock!

3.4. Adjusting the feet

If the product stands unbalanced after installation adjust the feet. Taking help from someone to slightly lift the refrigerator will facilitate this process.

3.3. Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the rating plate. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

• Electrical connection must comply with national regulations.

• Power cable plug must be within easy reach after installation.

• The voltage and allowed fuse or breaker protection are specified in the Rating Plate which is affixed to interior of the product. If the current value of the fuse or breaker in the house does not comply with the value in the rating plate, have a qualified electrician install a suitable fuse.

B WARNING: First unplug the product.

Product must not be plugged in when adjusting the feet. There is the risk of electric shock!

Turn the front feet to balance the product. The corner where the foot exists is lowered when you turn in the direction of arrow and raised when you turn it in the opposite direction.

3.5. Illumination lamp

Do not attempt to repair yourself but call the

Authorised Service Agent if the LED illumination lamps do not go on or are out of order.

Refrigerator / User Manual

8 / 27 EN