8
How to Change Function Settings
The camera functions and their settings can be selected and changed by using the following ways.
Direct keys
Control panel
Menus
Press ABCD in standby mode.
Press G in standby mode.
(indicated with the v icon in this manual)
Press F.
Using the Direct Keys
A Sensitivity
B White Balance
C Flash Mode
D Drive Mode
WXYZ
Using the Control Panel
G
You can set frequently used shooting functions. Press G in standby mode.
Use ABCD to select an item.
Use V to change settings.
E
MENU
Press F to cancel setting operation.
OK
Press E to confirm the selected item and return to the control panel.
Using the Menus
Most functions are set from the menus. Functions that can be set on the control panel can also be set from the menus.
1 2 3
Use V to switch the menu tabs.
Use AB to select an item.
Menu numbers
1 2 3
MENU
Press F to exit the menu screen.
1 2 3
MENU
Press D to display the pop-up menu.
MENU
F
Press D to display the submenu.
1 2 3
Use AB to select an item.
MENU OK
Press F to cancel the pop-up menu.
Press E to confirm the selected item.
MENU
Press F to return to the previous screen.
9
