16
Getting Your Camera Ready for
Use
Attaching the Strap
1
Pass the end of the strap through the strap lug and secure it on the inside of the clasp.
2
Attach the other end in the same manner.
Attaching a Lens
1
Make sure that the camera is turned off.
2
Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure to put the lens down with the lens mount side facing upward.
3
Align the lens mount index
(red dots: 3) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
3
To remove the lens
Attach the lens cap, and then turn the lens counterclockwise while holding down the lens unlock button (4).
4
Using the Battery and Charger
Charging the Battery
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
Indicator lamp
Battery charger
AC plug cord
Inserting/Removing the Battery
1
Slide the battery cover in
the direction of 1.
2
Insert the battery until it
locks into place with the A mark facing toward the lens.
To remove the battery, push the battery lock lever in the direction of 3.
3
Close the battery cover, and slide it in the direction
of 5.
3
Face the A mark on the battery up, and insert it into the battery charger.
The indicator lamp is lit while charging and turns off when the battery is fully charged.
(Approximate maximum charging time: 115 minutes)
4
2
1
5
3
17
18
Inserting a Memory Card
1
Slide the card cover in the
direction of 1.
1
2
2
Insert the card all the way with the memory card label facing toward the monitor.
Push the memory card in once to remove.
3
Close the card cover, and slide it in the direction of
4 .
4
3
Initial Settings
1
Press the power switch.
The [Language/W] screen appears.
2
Use ABCD to select the desired language and
press E.
The [Initial Setting] screen appears in the selected language.
Proceed to Step 7 if F
(Hometown) does not need to be changed.
MENU
3
Press B to move the frame to F and press D.
The [F Hometown] screen appears.
4
Use CD to select a city.
Use V to change the region.
MENU OK
5
Press B to select [DST] (daylight saving time),
and use CD to select S or T.
6
Press E.
The camera returns to the [Initial Setting] screen.
7
Press B to select
[Settings complete] and
press E.
The [Date Adjustment] screen appears.
8
Press D, and use AB to select the date format.
MENU OK
MENU OK
9
Press D, and use AB to select 24h or 12h.
10
Press E.
The frame returns to [Date Format].
11
Press B, and then press D.
The frame moves to the month if the date format is set to
[mm/dd/yy].
12
Use AB to set the month.
Set the day, year and time in the same manner.
mm/dd/yy 24h
MENU OK
13
Press B to select
[Settings complete] and
press E.
The camera switches to capture mode and is ready to take a picture.
MENU mm/dd/yy 24h
OK
Formatting a Memory Card
1
Press F.
The A1 menu appears.
2
Use V to display D4 menu.
3
Use AB to select [Format] and press D.
The [Format] screen appears.
4
Press A to select [Format]
and press E.
D 4
OK
19
