Volume control. AT&T TL7610, TL7610/TL7611, TL7611

Add to My manuals
72 Pages

advertisement

   Volume control. AT&T TL7610, TL7610/TL7611, TL7611 | Manualzz

Operation

Options while on calls

Volume control

To adjust the listening volume:

While on a call, press the VOLUME + – keys on the side of the headset to adjust the listening volume.

To adjust the speaking volume:

While on a call, press the VOLUME keys on the side of the headset base to adjust the speaking volume.

VOLUME

NOTES:

1. Listening volume settings are independent for each headset, but the speaking volume is shared by all the registered headset(s).

2. When the volume reaches the minimum or maximum setting, you hear three quick beeps.

MUTE /FLASH

Call waiting

If you subscribe to call waiting service offered by your telephone service provider, you hear a beep if there is an incoming call while you are already on a call.

• With installation options 1 or 2, press and hold

MUTE /FLASH on the side of the headset to put your current call on hold and answer the new call. You can press and hold MUTE /FLASH at any time to switch back and forth between calls.

• With installation option 3, you must answer call waiting using the corded telephone base (see your telephone user’s manual for instructions).

26

Operation

Options while on calls

Switching a call between handset and headset

When the headset base is plugged into the telephone wall jack (installation option 1 or 2):

To switch from the corded handset to a headset while on a call, press ON/OFF on the headset, then place the corded handset back into the telephone base.

To switch from a headset to the corded handset while on call, lift the corded handset from the telephone base, then press ON/OFF on the headset.

To switch from a cordless handset to a headset while on a call, press ON/OFF on the headset, then hang up the cordless handset.

To switch from a headset to a cordless handset while on a call, press the button you use to answer a call, then press ON/OFF on the headset.

When the headset base is connected to telephone (installation option 3):

To switch between a headset and the corded handset while on a call, press ON/OFF on the headset.

27

advertisement

Related manuals