advertisement
MOWING HEIGHT ADJUSTMENT
The cutting height adjustment pin (A, Figure 37) controls the mower cutting height. The cutting height is adjustable between 1-3/4” (4,4 cm) and 5” (12,7 cm) in 1/4” (0,64 cm) increments.
1. Depress the deck lift foot pedal (B) until it locks into the 5” (12,7 cm) position.
2. Place the cutting height adjustment pin in the desired cutting height.
3. Depress the deck lift foot pedal then push the lock lever (C) towards the right to release the lock.
4. Release the deck lift foot pedal until it comes to rest against the cutting height adjustment pin.
Troubleshooting, Adjustment & Service
B
A
C
Figure 37. Mowing Height Adjustment
A. Cutting Height Adjustment Pin
B. Deck Lift Foot Pedal
C. Deck Lift Lock lever
FOOT PEDAL ADJUSTMENT
The deck lift foot pedal can be adjusted to accommodate the operator’s height for optimal comfort.
To adjust pedal position:
1. Remove the foot pedal (A, Figure 38) from the pedal mount tab (B).
2. Remove the pedal mount hardware (C) and rotate the tab 180 degrees.
3. Reinstall the pedal mount hardware and tighten securely.
4. Reinstall the foot pedal on the pedal mount tab in the proper orientation as shown in Figure 38.
A
B
Figure 38. Foot Pedal Adjustment
A. Deck Lift Foot Pedal
B. Pedal Mount Tab
C. Pedal Mount Hardware
C
39
advertisement
Related manuals
advertisement
Table of contents
- 4 Operator Safety
- 13 Identification Numbers
- 14 Safety Decals
- 15 Safety Interlock System
- 16 Features & Controls
- 16 Control Functions
- 18 Operation
- 18 General
- 18 Checks Before Starting
- 19 Starting the Engine
- 19 Stopping the Rider
- 19 Pushing the Rider by Hand
- 20 Zero Turn Driving Practice
- 22 Mowing
- 22 Mowing Recommendations
- 23 Mowing Methods
- 24 Attaching a Trailer
- 25 Raise & Lower the Roll Bar
- 26 Storage
- 26 Starting After Long Term Storage
- 27 Regular Maintenance
- 27 Maintenance Schedule
- 28 Checking Tire Pressures
- 28 Checking/Adding Fuel
- 28 Fuel Filter
- 28 Oil & Filter Change
- 29 Check Hydraulic Oil Level
- 29 Hydraulic Oil Filter Change
- 30 Lubrication
- 31 Battery Maintenance
- 32 Servicing the Mower Blades
- 34 Troubleshooting, Adjustments & Service
- 34 Troubleshooting the Tractor
- 35 Troubleshooting the Mower
- 36 Troubleshooting Common Cutting Problems
- 37 Seat Adjustment
- 37 Ground Speed Control Lever Adjustment
- 37 Speed Balancing Adjustment
- 38 Neutral Adjustment
- 38 Return to Neutral Adjustment
- 39 Parking Brake Adjustment
- 40 Rear Suspension Adjustment
- 41 Mowing Height Adjustment
- 41 Foot Pedal Adjustment
- 42 Deck Lift Rod Timing Adjustment
- 43 Deck Leveling Adjustment
- 44 Hydraulic Pump Drive Belt Replacement
- 45 Mower Belt Replacement
- 46 Battery Service
- 48 Specifications