advertisement
Connections (Continued)
Conexiones (Continuación)
Make all the connections before plugging the AC power cord into an AC outlet.
Efectúe todas las conexiones antes de desenchufar el cable de alimentación de CA de la toma de CA.
Connecting to an amplifier with LINE OUT output terminals
Connect to the RIGHT and LEFT/MONO terminals of INPUT
(LOW-LEVEL).
Be sure to connect the correct cord to the RIGHT and LEFT terminals, respectively. (The LEFT and RIGHT terminals are mixed inside the unit.)
• Use separately purchased connecting cords.
Conexión con un amplificador con terminales de salida
LINE OUT
Conecte a los terminales RIGHT y LEFT/MONO de INPUT (LOW-LEVEL).
Al conectar el cable, asegúrese de verificar los terminales derecho (RIGHT) e izquierdo (LEFT), respectivamente.
•
Utilice cables de conexión vendidos separadamente.
Sound output (LINE OUT) (LEFT)
Salida de sonido (LINE OUT) (LEFT)
(Izquierda)
RIGHT LEFT
INPUT (LOW-LEVEL)
LEFT/MONO
INPUT (LOW-LEVEL)
LEFT/MONO
RIGHT
RIGHT LEFT/MONO
RIGHT
RIGHT
LEFT
LEFT
TO MAIN
SPEAKERS
INPUT (LOW-LEVEL)
RIGHT
INPUT (LOW-LEVEL)
RIGHT
Sound output (LINE OUT) (RIGHT)
Salida de sonido (LINE OUT)
(RIGHT) (Derecha)
Connecting to a preamplifier set
Connect to the RIGHT and LEFT/MONO terminals of INPUT (LOW-
LEVEL).
Be sure to connect the correct cord to the RIGHT and LEFT terminals, respectively.
• Use separately purchased connecting cords.
OUTPUT
Salida
(OUTPUT)
Preamplifier
Preamplificador
RIGHT LEFT Power amplifier
Amplificador de potencia
Conexión a un juego de preamplificador
Conecte a los terminales RIGHT y LEFT/MONO de INPUT (LOW-LEVEL).
Al conectar el cable, asegúrese de verificar los terminales derecho (RIGHT) e izquierdo (LEFT), respectivamente.
• Utilice cables de conexión vendidos separadamente.
INPUT (LOW-LEVEL)
LEFT/MONO
INPUT (LOW-LEVEL)
LEFT/MONO
RIGHT
RIGHT LEFT/MONO
RIGHT LEFT
RIGHT LEFT
TO MAIN
SPEAKERS
INPUT (LOW-LEVEL)
RIGHT
INPUT (LOW-LEVEL)
RIGHT
Set the voltage selector switch to the correct voltage
• Be sure that the AC power cord is disconnected before setting the voltage selectors switch.
Ajuste del conmutador selector de tensión a la tensión correcta
• Antes de ajustar el conmutador selector de tensión, asegúrese de comprobar que esté desconectado el cable de alimentación de CA.
– 4 –
advertisement
Key Features
- 100 watts of power for deep, rich bass
- Compact size for easy placement
- Variety of inputs and outputs for easy connectivity
- Automatic power on/off function
- Bass boost function for added low-end impact
- Phase switch for optimal sound quality
- Wired remote control for convenient operation