Väderprognos. Oregon Scientific 086L005036-017, BAR208HG


Add to my manuals
73 Pages

advertisement

Väderprognos. Oregon Scientific 086L005036-017, BAR208HG | Manualzz

Att välja visningsläge:

Tryck MODE för att välja mellan klocka med sekunder / veckodag / datum / månfas.

VÄDERPROGNOS

Denna produkt förutspår vädret för de kommande 12 till

24 timmarna inom en 30—50 km (19 –-31 miles) radie med 75% noggrannhet.

Soligt

VARNING BETYDELSE

Risk för höga temperaturer

Risk för höga vindhastigheter

Risk för storm

Risk för dimma

Halvklart

Risk för frost

Moln

Regn

Snö

VIKTIG INFORMATION OM VÄDRET

Vädermeddelandena påtalar indikationer på att speciella förhållanden råder, baserade på väderstationens kalkyler.

Betydelse av meddelandena visas nedan:

TEMPERATUR OCH LUFTFUKTIGHET

6

TEMPERATUR OCH LUFTFUKTIGHET

För att växla temperaturenhet:

Tryck °C / °F.

För att automatiskt växla mellan sensorer:

Tryck och håll inne för att visa varje sensors data i 3s.

För att avsluta tryck .

För att växla mellan aktuellt, minimum och maximum värde för aktuell sensor:

Tryck MEM upprepade gånger.

För att radera minnet:

Tryck och håll inne MEM.

BAR208HG_M_SWE_OP.indd 6 8/9/07 5:25:47 PM

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Atomic time: Automatically synchronizes its clock with a clock signal for precise timekeeping.
  • Weather forecasts: Predicts the weather for the next 12 to 24 hours with 75% accuracy.
  • Moon phase display: Shows the current phase of the moon.
  • Temperature and humidity readings: Displays indoor and outdoor temperature and humidity levels.
  • Weather warning messages: Provides alerts for potential weather hazards such as icy conditions.
  • Ice alerts: Notifies you when the temperature drops below freezing, helping you prevent icy conditions.

Related manuals

Frequently Answers and Questions

How do I set up the remote sensor?
1. Open the battery compartment of the sensor. 2. Select a channel and press RESET. 3. Close the battery door. 4. Place the sensor within 30 m (98 ft) of the main unit.
How do I manually set the clock?
1. Press and hold MODE. 2. Press or to change the settings. 3. Press MODE to confirm. 4. Follow the on-screen prompts to set the time zone, time format, date, and other settings.
How do I toggle between temperature units (°C and °F)?
Press the °C / °F button on the main unit to switch between Celsius and Fahrenheit.
How do I view weather data from multiple sensors?
Press and hold + MEM to auto-scan between sensors and display each sensor's data for 3 seconds. Press to end.
How do I reset the unit to default settings?
Press the RESET button located on the back of the main unit using a pointed object.

advertisement

Table of contents