advertisement
■
Intermediate GLU reading (only for GLU system)
This function is used for temporary inspection of the guest check. The details of the guest check can be printed on the receipt or the slip. For selecting these printers, contact your authorized SHARP dealer.
Procedure
MISC FUNCTIONS 02 INTERMED.
GLU code ENTER OUTPUT
RECEIPT ENTER
SLIP ENTER
NOTE
This function is available after finishing the guest check entry.
Example
Key Operation
MISC FUNCTIONS
[Select “02 INTERMED.”] 21 ENTER
ENTER
■
Bill totalizing/bill transfer
Bill totalizing
The bill totalizing function is used to totalize multiple bills when, for example, a particular guest pays not only his or her bill, but also the bills of other guests.
Procedure
BILL T
When more bills are added
GLU/PBLU code
(1 to 99999999)
#1
OPEN THE TABLE
GLU/PBLU code
(1 to 99999999)
#2
SUB TOTAL NBAL
[Payment operations]
NOTE
• All #1 bills are added to a #2 bill. A maximum of 5 bills is available for #1.
• The GLU/PBLU code of #1 must be in use. If the guest check(s) of #1 or #2 has already been handled by another clerk, the guest check(s) must have been made “Transferring out.”
• After the bill totalizing operation, the individual payment is not allowed.
71
72
Example
Key Operation
BILL T
12 OPEN THE TABLE
13 OPEN THE TABLE
11 SUB TOTAL
NBAL
Display
Bill transfer
This function is used to change the GLU/PBLU code of a particular bill.
Procedure
BILL T
GLU/PBLU code
(1 to 99999999)
#1
OPEN THE TABLE
GLU/PBLU code
(1 to 99999999)
#2
SUB TOTAL NBAL
NOTE
• This function requires that the current GLU/PBLU code be entered for #1 and a new GLU/PBLU code be entered for #2.
• A #1 bill is transferred to a #2 bill. The #1 bill is then cleared and set free.
Example
Key Operation
BILL T
11 OPEN THE TABLE
12 SUB TOTAL
NBAL
Display
advertisement