Report printer. Sharp UP-3300

■

Slip printer (continued)

• INITIAL FEED# (Use the numeric entry)

Initial line feed for a slip (0 to 64 lines)

• SLIP MAX LINE (Use the numeric entry)

Maximum number of lines printable on a slip (0 to 99)

• VP PRINT TIMES (Use the numeric entry)

Number of times of validation printing (0 to 9)

■

Report printer

Procedure

Program each item as follows:

• TERMINAL# (Use the numeric entry)

Terminal number (1 through 254 : Enter “0” for local device.)

• CHANNEL# (Use the numeric entry)

Channel number (1 through 7)

When you program as “0”, no RS-232 channel is assigned.

• PRINTER NAME (Use the selective entry)

Select the printer to be used.

SHARP ER-01PU

SHARP ER-03/04RP

EPSON TM-T88/85

SHARP UP-T80BP

EPSON TM-300

EPSON TM-U950

• AUTO CUTTER (Use the selective entry)

Auto cutter function

YES: Enables auto cutter function.

NO: Disables auto cutter function.

NOTE

When “ER-03RP” is connected, select “NO.”

• PAPER SHEET (Use the selective entry)

Select a paper type.

TWO OR MORE: Uses two or more sheets.

ONE SHEET: Uses one sheet.

NOTE This option is available when the “TM-300” is selected.

■

Remote printer (KP#1 through KP#9)

Procedure

Program each item as follows:

• TERMINAL# (Use the numeric entry)

Terminal number (1 through 254 : Enter “0” for local device.)

• CHANNEL# (Use the numeric entry)

Channel number (1 through 7)

When you program as “0”, no RS-232 channel is assigned.

• PRINTER NAME (Use the selective entry)

Select the printer to be used.

SHARP ER-01PU

SHARP ER-03/04RP

EPSON TM-T88/85

SHARP UP-T80BP

EPSON TM-300

EPSON TM-U950

207