installation. VTech CS5113, CS5111

Getting started

Wall bracket installation (continued)

Wall bracket installation:

1.

2.

3.

First, insert the lower portion tabs of the wall bracket into the lower grooves in the telephone base, then snap the upper portion tabs of the wall bracket into place.

Mount the telephone base on the wall by positioning it so the mounting studs fit into the holes on the telephone base and wall bracket. Slide the telephone base down on the mounting studs until it locks into place.

To remove the bracket, press both upper portion tabs firmly and pull the bracket downward until it releases from the grooves.

Wall bracket upper portion tabs

AC 7.5V

Wall bracket in wall mount orientation lower portion tabs lower groove upper grooves

Desktop/tabletop bracket installation:

Your telephone comes ready for table use. If you have repositioned the bracket for wall mounting and now want to return to table use, follow these steps:

1.

Insert the lower portion tabs of the wall bracket into the upper grooves of the telephone base.

2.

3.

Snap the upper portion tabs of the wall bracket into place.

To remove the wall bracket, press both upper portion tabs firmly inward and pull the wall bracket upward until it is released from the grooves.

AC 7.5V

4