advertisement
Telephone settings
Ringer volume (continued)
4. Press SELECT to confirm your selection. You will hear a confirmation tone.
-OR-
1.
Press and hold or until the screen displays RINGER VOL: and the current setting when the handset is not in use. The current setting flashes and you will hear a sample of the ringer volume.
2.
3.
Press or to select ringer volume from OFF, LOW or HI. You will hear a sample of the selected volume level.
Press SELECT to confirm your selection. You will hear a confirmation tone.
•
• If the ringer volume is set to OFF, RINGER OFF and are displayed.
Even if the ringer volume is set to OFF, the handset still rings when you press FIND HANDSET.
Dial mode
If you have touch tone service, the telephone is ready for use as soon as the battery is charged. If you have pulse (rotary) service, you need to change the dial mode.
1.
2.
Press PROG
when the handset is not in use.
Press or until the screen displays DIAL MODE: and the current setting.
3.
4.
5.
Press SELECT
.
The current setting flashes.
Press or to select TONE or PULSE
.
Press SELECT to confirm your selection and there is a confirmation tone.
Home area code
If you dial your local calls using only seven digits (area code not required), you can program your home area code, following the steps below. By programming your home area code, when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log.
1.
2.
Press PROG
when the handset is not in use.
Press or until the screen displays HOME AREA CODE.
3.
4.
5.
Press SELECT flashing.
.
The stored area code is displayed with the first digit
Use the dial key pad to enter the desired home area code.
Press SELECT to confirm. You will hear a confirmation tone.
•
•
If your phone service provider requires you to dial the area code when making a local call, or you want to cancel the home area code you have already programmed, reprogram your home area code to 000.
Press CHAN/REMOVE when in the home area code menu to delete the stored home area code. ___ is then displayed.
8
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Getting started
- 3 Parts checklist
- 4 Telephone base installation
- 5 Battery installation and charging
- 5 Wall bracket installation
- 6 installation
- 7 Handset layout
- 8 Telephone base layout
- 9 Telephone settings
- 9 Date and time
- 9 Ringer
- 9 Ringer volume
- 10 Dial mode
- 10 Home area code
- 11 Language
- 11 Clear voicemail
- 12 Telephone operation
- 12 Make calls
- 12 Answer calls
- 12 End calls
- 12 Volume
- 12 Channel
- 12 Call waiting
- 12 Temporary tone dialing
- 13 Redial
- 13 Find handset
- 13 Directory
- 13 Store a directory entry
- 14 Character chart
- 14 Review the directory
- 14 Edit a directory entry
- 15 Delete a directory entry
- 16 speed dial
- 16 Dial a number from the directory
- 16 Speed dial
- 16 Store a speed dial entry
- 17 Edit a speed dial entry
- 18 Delete a speed dial entry
- 18 Dial a speed dial number
- 18 Reassign speed dial locations
- 18 About caller ID
- 19 Call log
- 19 Review the call log
- 20 ready to dial
- 20 Dial a call log number
- 20 to the directory
- 21 Delete from the call log
- 21 Delete an entry
- 21 Delete all entries
- 21 messages
- 22 Appendix
- 22 messages
- 23 Battery
- 24 Important safety instructions
- 25 Troubleshooting
- 30 Operating range
- 30 Maintenance
- 30 About cordless telephones
- 31 Warranty
- 33 FCC, ACTA and IC regulations
- 34 seal
- 35 Technical specifications
- 36 Index