- Computers & electronics
- Audio & home theatre
- Cassette players
- White-Westinghouse
- WTV11321B
- User manual
advertisement
T5219.QX3 01.3.6 5:15 PM Page 25
ON SCREEN DISPLAY
To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:
WHEN THE CLOSED CAPTION MODE IS OFF:
<Off mode> <Counter mode> <Clock mode>
• Counter mode: After 5 seconds, only the counter remains. To clear it, press the DISPLAY button.
• Clock mode: After 5 seconds, only the clock and the channel number remain. To clear them, press the DIS-
PLAY button.
Press once
COUNT 0:12:34
Press once
Press once
5:40PM
CH2
WHEN THE CLOSED CAPTION MODE IS ON:
• The On Screen Display disappears after 5 seconds.
• This is true even if the MUTE button is pressed, or the
PAUSE/STILL button is pressed while recording.
OFF mode Clock/Counter mode
STOP 5:40 PM
CH2
SP COUNT 0:12:34
SPECIAL FEATURES
REAL TIME TAPE COUNTER
This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The “–” indication will appear when the tape has rewound further than “0:00:00” on the tape counter.
AUTO REWIND-EJECT
• When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/VCR will eject the tape and turn itself to off.
• This function is operative when Repeat Play is set to the [OFF] position.
• The tape will not auto-rewind during timer recording or One Touch Recording.
MAINTENANCE
CABINET CLEANING
• Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.
If a streaky or snowy picture appears during play-
- 25 back, the video heads in your TV/VCR may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-414-1053, to locate an Authorized Service Center.
NOTES:
• Remember to read the instructions included with the video head cleaner before use.
• Clean video heads only when problems occur.
SERVICING
• Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800-
414-1053, to locate an Authorized Service Center.
EN
01A11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 IMPORTANT SAFEGUARDS
- 4 PRECAUTIONS
- 6 FEATURES
- 6 SUPPLIED ACCESSORIES
- 9 PREPARATION FOR USE
- 9 ANTENNA/CABLE CONNECTIONS
- 10 EXTERNAL INPUT MODE
- 10 INSTALLING THE BATTERIES
- 10 SET UP FOR USE
- 11 CLOCK SET UP (AUTO / MANUAL)
- 12 CHANNEL SET UP AGAIN
- 12 DELETING (OR ADDING) CHANNEL
- 13 SELECTING THE LANGUAGE
- 13 DAYLIGHT-SAVING TIME
- 14 TV OPERATION
- 14 WATCHING A TV PROGRAM
- 14 GAME MODE
- 14 DEGAUSSING
- 14 PICTURE CONTROL
- 15 CLOSED CAPTION SYSTEM
- 15 V-CHIP SET UP
- 17 PLAYBACK
- 17 NORMAL PLAYBACK
- 17 AUTO REPEAT PLAYBACK
- 18 SEARCH
- 18 STILL PICTURE
- 19 NOISE CANCEL (in the Still mode)
- 19 VERTICAL HOLD CONTROL
- 19 TRACKING ADJUSTMENT
- 19 RENTAL PLAYBACK
- 19 RECORDING
- 20 NORMAL RECORDING
- 20 RECORDING
- 20 OTR (One Touch Recording)
- 21 TIMER RECORDING
- 22 TIMER PROGRAM EXTENSION
- 23 RECORDING
- 23 AUTO RETURN
- 23 WAKE UP TIMER
- 24 SLEEP TIMER
- 24 COPYING A VIDEO TAPE
- 25 ON SCREEN DISPLAY
- 25 SPECIAL FEATURES
- 25 REAL TIME TAPE COUNTER
- 25 AUTO REWIND-EJECT
- 25 MAINTENANCE
- 26 TROUBLESHOOTING GUIDE
- 27 SPECIFICATIONS
- 27 CABLE CHANNEL DESIGNATIONS
- 28 SUS FUNCIONES
- 30 CONEXIONES DE ANTENA/CABLE
- 30 MODO DE ENTRADA EXTERNA
- 30 INSTALACIÓN DE LAS PILAS
- 31 PRIMERA VEZ
- 31 AJUSTE DEL RELOJ