Pulse to Tone (DTMF) Conversion. XBLUE Networks 45p SLT, 45p Single Line Telephone

Single Line Telephone User Guide

The Phone Lock/Unlock feature allows a user to prevent ANY outgoing CO Line calls from their extension. The extension password is used to lock/unlock the telephone. This feature code is also used to program your private four-digit extension password.

The use of the feature (Phone Lock) will block all CO Line calls, including emergency calls such as “911”. Therefore, it is not recommended that any telephone be locked.

1.

2.

3.

4.

Conditions

When an extension is locked it can only make intercom calls; answer and retrieve calls on hold are not affected.

If a user forgets their password it may be retrieved via the system database administration.

The programmed Attendant’s Private Password is used to enter Attendant Administration.

If a CO Line or CO Line call is attempted from a locked telephone, error tone will be heard.

Pulse to Tone (DTMF) Conversion

*

The Pulse to Touch Tone (DTMF) conversion feature enables the system to use Dial Pulse

(rotary) outgoing telephone company lines and access special services which require DTMF tones. A limited number of applications may still only support Pulse dialing for outgoing calls, but after reaching an outside party the use of Touch Tone mode may be required.

1.

2.

3.

Conditions

The dialing conversion can only be from pulse mode to tone DTMF mode, not from

DTMF back to pulse mode.

The Pulse to Tone code can be programmed in any speed dial bin.

When making a call on a CO Line with Pulse Rotary dialing, the digits following” * “will be sent in DTMF tone mode.

Recall

The Recall feature pertains to calls that are parked, on hold, or calls that have been transferred to another extension. Calls which go unanswered after a preset period of time are

XBLUE Networks 17