advertisement
Launch Filter
Editor
SATEL NMS PC Version 2.0.18
User Manual Version 2.5
Starts the external program
“SATEL Filter Editor.exe”.
information.
Network Settings View
6.5.8 Help menu
Menu Command
About
Required selected object
None
Description
Display program version and loaded SATELNMS.ID file version information
Other locations / keyboard shortcuts
6.6 Toolbar
The toolbar contains some essential commands. These commands also appear in the menus.
Figure 15: Toolbar
Some commands appear grayed-out (inactive) if they cannot be executed at the moment. Refer to the table below for explanation.
Toolbar
Command
Active if Description
Open Always Open an existing .sax or .saxd file
Save System There are unsaved changes Save the system to the .saxd file
Monitoring A Network has been created Open the Monitoring settings view.
Connection A Network has been selected Open the Connection dialog to change the connection settings of the selected network.
Detect
Calculate routes
A Network has been selected Try to detect if a radio modem can be contacted using the current connection settings of the selected network.
A Network has been selected and there are changes to routing settings
Check to see if network settings of the selected network are valid and generate routing tables.
NOTE: Always click “Calculate routes” after making changes to links between modems or terminal addresses in modems and follow the
To-do list to take the new settings into use.
41
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project