Setting the Dolby ProLogic. Samsung SP47W3, SP-47W3HF, SP-54T6HF, SP-54T6HP, SP-43T6HF, SP62T6, SP62T6HF, SP-42W5HF

Setting the Dolby ProLogic

You can enjoy Dolby prologic surround effect fully with only surround speakers are connected to TV.

This allows various modes for the main, center and rear speakers to be selected.

Surround Mode

NORMAL

PHANTOM

WIDE

Input Signal

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Main

✔

✔

✔

✔

Speakers

Centre

✔

✔

✔

✔

Rear

✔

✔

✔

OFF

✔

✔

➢

✔

; Sound

1 Press the MENU button.

Result: The main menu is displayed.

2 Move the joystick up or down until the SOUND is selected and press the joystick ( ) button.

Result: The SOUND menu is displayed.

3 Move the joystick up or down until the DOLBY PRO LOGIC is selected and press the joystick ( ) button.

Result: The DOLBY PRO LOGIC menu is displayed with the

MODE selected.

4 Select the required mode (OFF, NORMAL, PHANTOM, WIDE) by moving the joystick left or right.

The following Dolby settings can be adjusted to suit your personal preferences.

◆ Volume of the centre and rear speakers

◆ Prologic delay time for the rear speakers (between

15 and 30 ms)

◆ Activation/deactivation of the test tone to simulate the volume on each speaker

5 To...

Change a setting

Move the joystick...

up or down.

Change the option left or right.

6 When you are satisfied with the settings, press the TV button, or press the MENU button repeatedly to return to normal viewing.

Rear of TV

Option

R L

SOUND

MODE œ √

EQUALIZER √

AUTO VOLUME : OFF

MELODY : ON

DOLBY PRO LOGIC √

SELECT ENTER EXIT

DOLBY PRO LOGIC

MODE œ √

SELECT ADJUST EXIT

DOLBY PRO LOGIC

MODE œ √

CENTER : 0

REAR : 0

DELAY : 20 ms

TEST TONE : OFF

CONNECT SPEAKER

SELECT ADJUST EXIT

DOLBY PRO LOGIC

MODE œ √

CENTER : 0

REAR : 0

DELAY : 20 ms

TEST TONE : OFF

CONNECT SPEAKER

SELECT ADJUST EXIT

29

ENG