Manual control without lock function. Vermeiren Luna X-low, Luna Basic, Luna, Luna Metal, Luna Deluxe


Add to My manuals
176 Pages

advertisement

Manual control without lock function. Vermeiren Luna X-low, Luna Basic, Luna, Luna Metal, Luna Deluxe | Manualzz

EN

Luna

2010-11

2.2 Manual control without lock function

L

CAUTION: Risk of injury - Adjustments made by the patient must be allowed under supervision only.

This manual control shall be used in combination with the disabling box.

The height of the bed surface, the angle of the backrest and the knee-bend angle can be adjusted with the manual control. After use the manual control needs to be hung on the side rail and secured by means of the disabling box.

Following adjustments can be used:

Back section down and up function

Mattress support platform down and up

Leg down and up function

Anti trendelenburg

When connecting the manual control to the disabling box please make sure that the connection plug in the disabling box is especially secure. Proceed as follows:

1. Remove the safety ring from the connection.

2. Insert the connection plug for the manual control in the disabling box.

3. Place the safety ring in the disabling box connection so the cable cannot be removed involuntarily.

The connection cable can only be removed from the disabling box after the safety ring has been removed.

Page 8 

advertisement

Key Features

  • Low height for easy transfers and getting in and out of bed
  • Manual controls for easy operation
  • Sturdy construction for stability and support
  • Adjustable side rails for added safety
  • Optional accessories, such as the lifting pole, for enhanced functionality

Related manuals

Frequently Answers and Questions

How do I lower the headrest in an emergency?
To lower the headrest in an emergency, pull the red lever located at the foot of the bed.
How do I operate the steering casters?
To operate the steering casters, push down on the lever located at the base of the bed.
How do I use the manual control with lock function?
To use the manual control with lock function, first unlock the control by turning the key. Then, use the lever to raise or lower the bed.

advertisement

Table of contents