Shipping and storage. Vermeiren Luna X-low, Luna Basic, Luna, Luna Metal, Luna Deluxe

Vermeiren Luna X-low is a versatile and reliable manual bed that offers a range of features to enhance comfort and safety for users. Its low height and easy-to-use controls make it an excellent choice for individuals who require a low bed for easy transfers or those who have difficulty getting in and out of bed. The bed's sturdy construction and adjustable side rails provide stability and support, while the optional accessories, such as the lifting pole, can further enhance its functionality. Whether you're looking for a comfortable and safe sleeping solution or a bed that can accommodate your specific needs, the Vermeiren Luna X-low is an excellent choice.

Luna

2010-11

4.2 Shipping and storage

The shipping and storage of the bed shall be according following instructions:

Store in a dry place (between +5 °C and +41 °C).

The relative humidity of the air should be between 30% and 70%.

Provide sufficient covering or packaging to protect the bed from rust and foreign bodies. (e.g. salt water, sea air, sand, dust).

Store all removed parts together in one place (or mark them if necessary) to avoid mixing up with other products when re-assembling.

Components must be stored without being subjected to strains (Don't put too heavy parts on the bed, not clamping between something, ...).

Carefully roll up the power lead with no kinks and place it in the receptacle provided.

Check internal cables for squashing and the prevention of kinks.

4.3 Care

4.3.1 Metal frames, wooden parts

The cleaning of the metal frames and the wooden parts shall be according:

 Clean metal frames and the wooden parts with a cloth moistened with hot water. Be aware that you don't soak the metal frames and the wooden parts.

 Use a mild commercial detergent for removing stubborn dirt.

 Stains can be removed by using a sponge or a soft brush.

 Do not use strong cleaning liquids like solvents, nor use hard brushes.

 Never clean with steam and/or pressure washers.

4.3.2 Plastic parts

Clean plastic parts of your bed with commercial plastic cleaners. Only use a soft brush or soft sponge.

The motors and the manual unit should only be cleaned with a slightly damp cloth.

4.3.3 Coating

The high quality of the surface layer guarantees optimal protection against corrosion. If the outer coat is damaged by scratching or in some other way, get your specialist dealer to repair the affected surface.

When cleaning, only use warm water and normal household detergents and soft brushes and cloths. Ensure that no wetness gets into the tubes.

Initially the zinc parts only require rubbing with a dry cloth. Stubborn dirt can best be removed by using a suitable commercial zinc polish.

Page 19

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

Low height for easy transfers and getting in and out of bed
Manual controls for easy operation
Sturdy construction for stability and support
Adjustable side rails for added safety
Optional accessories, such as the lifting pole, for enhanced functionality

Related manuals

Frequently Answers and Questions

How do I lower the headrest in an emergency?

To lower the headrest in an emergency, pull the red lever located at the foot of the bed.

How do I operate the steering casters?

To operate the steering casters, push down on the lever located at the base of the bed.

How do I use the manual control with lock function?

To use the manual control with lock function, first unlock the control by turning the key. Then, use the lever to raise or lower the bed.