PAT-XT English

2

TABLE OF CONTENTS (English) SAFETY INFORMATION

Safety Information ........................................................ 2

Description ................................................................... 4

Specifications - Tool ..................................................... 4

Specifications - Hydraulic Power Source ... ...................5

Features and Benefits .................................................. 5

Pre-Operation ............................................................... 6

Operation ..................................................................... 6

Maintenance ................................................................. 7

Service ......................................................................... 7

Troubleshooting ............................................................ 8

Commonly asked questions ......................................... 9

Parts Section .............................................................. 10

Battery recycling ......................................................... 11

Spanish (ESPAÑOLES) .............................................. 12

French (FRANÇAIS) ................................................... 22

The above symbols are used to call your attention to instructions concerning your personal safety. Look for these symbols; read and follow the instructions that accompany them. Failure to follow the safety information provided can lead to serious personal injury or death.

SAFETY FIRST

For information only, contact:

BURNDY® TOOL SERVICE CENTER

150 BURNDY Road

Littleton, NH 03561 or call, toll free 1-800-426-8720

The information provided in this manual is essential for the safe handling, operation, and maintenance of the BURNDY® PAT46-

18V. The operator must read, understand, and follow these instructions and ALL safety warnings and labels before operating these tools.

Additional or replacement manuals may be obtained free of charge from the BURNDY® Tool Service Center.

• Only use these tools in accordance with the manufacturer’s specifications. Other use of these tools may lead to serious personal injury or death.

Each employer shall instruct each employee and user in the recognition and avoidance of unsafe working conditions and the laws and regulations applicable to his/ her work environment to control or eliminate any hazards or other exposure to illness or injury. Reference: OSHA

29CFR 1910 etseq. (1994).

If a conflict arises between the material contained in this manual, rules of the user, his/her employer or company, and legal or industry guidelines the more stringent rules take precedence and must be followed.

Observe and follow all other safety rules and regulations for the job.

Safety is everyone’s responsibility.

3

OPERATING SAFETY PRECAUTIONS

This tool is NOT insulated for use on or near energized conductors. Use of this tool near energized conductors may lead to electrical shock, causing severe injury or death.

Pinch point hazard. Crimp ram operates at high speed and force and can cause severe personal injury. Keep all body parts away from moving parts of the tool, especially the

T-track area of the head and die holder during operation.

Use all appropriate personal safety equipment when handling, operating, and servicing this tool such as: safety shoes, hard hat, eye and ear protection, work gloves, and sleeves.

To help ensure safe operation of this tool, keep all safety labels clean and legible. Replace labels when necessary with new labels. See the PARTS SECTION of this manual for information on reordering.

Hydraulic fluid under pressure. Do NOT use any part of your body to locate a hydraulic leak. Escaping fluid under pressure can cause severe injury or death. If injury results from escaping hydraulic fluid, seek immediate medical attention to avoid serious bodily injury.

Do NOT over-reach while operating this tool.

Loss of balance can cause serious personal injury or death. Move closer to work area and securely support yourself and your work. ALWAYS keep proper footing and balance.

USE

This tool has been specifically designed for use with

BURNDY ® Products. Use of non BURNDY ® Products is limited to those which conform to BURNDY® Technical

Specifications applicable to the tool. Use of non BURNDY ® non-conforming products with the tool shall be deemed misuse or abuse.

Always clip one end of the lanyard to the safety ring on the tool and the other end to a secure point to avoid accidental drop of more than 6 feet. Failure to follow this instruction may result in personal injury or tool damage.