Pioneer Baixe

Connecting the Units

Connecting the power cord (2)

If this unit is used with more than a 6-ch speaker system, be sure to connect the yellow lead to the battery terminal directly.

Hide-away unit (supplied)

Connect when the audio settings of this product are used in the network mode.

Left

Tweeter

(FRONT HIGH

OUTPUT)

+

≠

White

White/black

Gray

Gray/black

+

≠

Right

Tweeter

(FRONT HIGH

OUTPUT)

7

Front center speaker

(FRONT CENTER

OUTPUT)

+

≠

Black/white

Black

Front speaker

(MID/FRONT

OUTPUT)

+

≠

White

White/black

Rear speaker

+

≠

Green

Green/black

Black/white

Black

Gray

Gray/black

+

≠

Rear center speaker

(REAR CENTER

OUTPUT)

+

≠

Front speaker

(MID/FRONT

OUTPUT)

Violet

Violet/black

+

≠

Rear speaker

Violet/white

See the section “When connecting with a rear view camera”.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT

PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE

OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS

LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS

INJURY OR DAMAGE.

Connection method

1. Clamp the lead.

2. Clamp firmly with

needle-nosed

pliers.

Note:

• The position of the parking brake switch depends

on the vehicle model. For details, consult the

vehicle Owner’s Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking brake.

This lead must be connected to the power supply side of the parking brake switch.

Power supply side

Ground side

Parking brake switch

Blue/white

To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC).

Fuse (4 A)

Yellow

After making all other connections to this unit, connect this to the positive + terminal of the battery.

CAUTION

Fuse (10 A)

Fuse (10 A)

Black (ground)

To vehicle (metal) body.

Attach a 20A fuse immediately prior to the battery. Also, use heat resistant battery cable with more than 5-square millimeter sectional area.

Fig. 4

8

Connecting the Units

When connecting to separately sold power amp

Hide-away unit (supplied)

9

See the section “Connecting the power cord (2)”.

Blue/white

To system control terminal of the power amp or Auto-antenna relay control terminal (max.

300 mA 12 V DC).

System remote control

Connect when the audio settings of this product are used in the network mode.

RCA cables

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Front center speaker

Left

Tweeter

Front middle range speaker

Rear speaker

Subwoofer

Rear center speaker

Right

Tweeter

Front middle range speaker

Rear speaker

Fig. 5

10