advertisement
CONTROLS AND COMPONENTS
ACCESSORY PORTS
1. High pressure water outlet
2. Vacuum inlet (keep covered when not in use.)
Solution prespray wand. Keep clipped in place when not in use.
Front lift handle.
Rotary head solution sight window.
Prespray and/or upholstery solution sight window
Solution spray wand hose coil.
WARNING: Moving parts.
Keep hands and feet clear.
Waste tank clear window release clamps
Fresh water inlet
Waste water outlet
Hour meter
Vacuum switch
Pumpout switch
Separate circuit indicator
light. Glows green when unit is properly connected to two
15 amp circuits.
Rotary head control lever
Solution control lever
VISIT WWW.VERSACLEANSYSTEMS.COM FOR DETAILED INSTRUCTIONS
49-090A VC700 2013-07 2 Legend Brands, Inc.
advertisement
Related manuals
advertisement
Table of contents
- 1 BEFORE YOU BEGIN
- 2 CONTROLS AND COMPONENTS
- 3 BEFORE FIRST USE
- 4 SETUP FOR CARPET CLEANING
- 5 CONTROLS
- 5 Prespray wand. Squeeze lever to release solution. Wand is pressurized by water supply.
- 5 Control rotary head with left hand lever. Grip handle firmly before squeezing lever.
- 5 Control solution flow with right hand lever. Release handle to stop flow.
- 5 To manually pump out tank, press and hold pumpout switch to “Manual” position. Release switch to return to “Auto” mode. Use manual pumpout if excessive foaming occurs and at the end of the job to ensure tank is empty.
- 5 CLEANING PROCEDURES
- 5 TRANSPORTATION AND STORAGE
- 6 MAINTENANCE
- 6 Important: Do not tip unit on its back, or oil may leak.