Secure Lantronix Network. Lantronix Lantronix SLC

7: Services

Secure Lantronix Network

Use the Secure Lantronix Network option to view and manage Secure Lantronix Managers and

Spider devices on the local subnet.

Note: Status and statistics shown on the web interface represent a snapshot in time. To see the most recent data, reload the web page.

To access Secure Lantronix Managers and Spider devices on the local network:

1.

Click the Services tab and select the Secure Lantronix Network option. The following page displays.

Figure 7-4 Services > Secure Lantronix Network

2.

Click a device IP Address in the column labeled IP Address/Web Interface. A separate browser opens at the device Home page after you have logged in. In the separate browser page, you can manage the device.

3.

To access a device port via SSH or Telnet, click on the bright green device ports in the Ports column. SSH/Telnet access to the CLI or a device port requires that Web SSH or Web Telnet is enabled.

Figure 7-5

shows the Telnet window that displays.

SLC™ Console Manager User Guide 78

7: Services

To directly access the CLI interface for a device:

1.

Click the SSH or Telnet link in the SSH/Telnet to CLI column directly beside the port you would like to access. A ssh or telnet popup window appears depending on what is clicked.

Figure 7-5 Telnet Session

To configure how Secure Lantronix devices are searched for on the network:

1.

Click the Search Options link on the top right of the Services > Secure Lantronix Network

page. The following web page displays:

SLC™ Console Manager User Guide 79

Figure 7-6 Services > Secure Lantronix Network > Search Options

7: Services

2.

Enter the following:

Secure Lantronix

Network Search

IP Address

Select the type of search you want to conduct.







Local Subnet performs a broadcast to detect Secure Lantronix devices on the local subnet.

Manually Entered IP Address List provides a list of IP addresses that may not respond to a broadcast because of how the network is configured.

Both is the default selection.

If you selected Manually Entered IP Address List or Both, enter the IP address of the Secure Lantronix device you want to find and manage.

3.

If you entered an IP address, click the Add IP Address button. The IP address displays in the

IP Address List.

4.

Repeat steps 2 and 3 for each IP address you want to add.

5.

To delete an IP address from the IP Address List, select the address and click the Delete IP

Address button.

6.

Click the Apply button. When the confirmation message displays, click Secure Lantronix

Network on the main menu. The

Services > Secure Lantronix Network page displays the

Secure Lantronix devices resulting from the search. You can now manage these devices.

Secure Lantronix Network Commands

The following commands for the command line interface correspond to the web page entries described above.

To detect and view all SLC console manager or user-defined IP addresses on the local network: set slcnetwork <one or more parameters>

Parameters: add <IP Address> delete <IP Address> search <localsubnet|ipaddrlist|both>

SLC™ Console Manager User Guide 80