Chapter 3 - Using the WEB Management
Software
This chapter describes how to configure the router by using the Web Management software.
Software Interface Overview
This section explains the menu structure and the navigation buttons of the router’s Web Management software.
Menu Bar Overview
You can select the following items from the menu bar:
IP Setup
PPP
Networks & Services
Packet Filters
Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote
Configuration.
Used to configure the PPP authentication, dial-on-demand, router authentication, and
Wakeup on Call.
Used to configure networks and services to make them available to other functions such as allowed packet filters, static routes, remote configuration, DNAT, and GRE tunnels and routes.
Defines filter rules, DNAT configuration, and ICMP rules.
GRE Tunnels
DHCP Server
IPSec
Used to define Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through which traffic is routed.
Used to configure the DHCP server settings.
Serial Port
Tools
Allows the device to support LAN-to-LAN VPN tunneling with 3DES and AES 128-192-256 encryption support
Adds support for RS-232 serial port so that Ethernet and legacy serial devices can share the same cellular connection.
Sets DDNS Force Update, displays DDNS Status, resets the modem, and provides interfaces for Firmware Upgrade, Load Configuration, and Save Configuration.
Shows statistics and logs maintained by the router.
Statistics & Logs
Save & Restart
Help Index
Saves your settings and reboots your router.
Opens the online Help file.
Submitting, Saving and Restarting Overview
Nearly every page of the software’s interface includes a Submit button. This button allows you to save changes you make to the software pages and their parameters.
To ensure your changes go into effect, you must eventually use Save & Restart, located on the Menu bar. You do not need to click Save& Restart after each change you make. You can change several areas, and then click Save &
Restart.
MultiModem rCell User Guide 34
