advertisement
![Customizing. Garmin iQue M5, iQue® M5 | Manualzz Customizing. Garmin iQue M5, iQue® M5 | Manualzz](http://s1.manualzz.com/store/data/008841020_1-0003bda0ae5b1630abb337659686bc72-360x466.png)
C
USTOMIZING
> C
USTOMIZING
S
YSTEM
S
ETTINGS
C
USTOMIZING
After you become comfortable using your iQue M5, you may want to customize Que settings to meet your needs. You can change many settings from within
QuePreferences. From QueMap, tap Menu and select
QuePreferences.
Customizing System Settings
To change system settings, open QuePreferences as described above and tap the System tab.
Changing Language
Select a language for text and for voice from the dropdown menus (if enabled).
Changing GPS Mode
Enable WAAS (see
page 47 ) or Battery Saver Mode,
which updates GPS positions less frequently.
Changing Units
Tap Advanced to select units of measure for distance, speed, direction, elevation, and depth.
Choose a language from the drop-down menus.
Enable WAAS or battery saver mode from this menu.
36
Tap to adjust power settings.
Tap to change units of measure.
iQue M5 Que Applications Guide
Customizing the Map
You can make navigating easy and efficient by customizing the way QueMap appears. From QueMap, tap Menu and then QuePreferences. The Map tab opens automatically.
Tap to change map orientation.
C
USTOMIZING
> C
USTOMIZING THE
M
AP
Changing Orientation
Tap the Orientation drop-down menu to change the orientation of the map to North Up or Track Up. You can also select a zoom level where the orientation changes. For example, you can choose Track Up below
120 mi. At zoom levels greater than 120 miles, the map displays in North Up mode; otherwise, the map displays in Track Up mode.
Tap a color mode to change for day or night lighting conditions.
Tap to change the level of map detail that appears.
Select At GPS Location when navigating off-road.
Tap to turn on automatic zoom during navigation.
Tap to view or delete detailed maps.
Tap to set auto zoom
(advanced feature).
iQue M5 Que Applications Guide 37
C
USTOMIZING
> C
USTOMIZING THE
M
AP
Changing Color
Tap the Color Mode drop-down menu to change between three modes for different lighting conditions.
Auto switches between Day and Night color modes at sunrise and sunset. You can also turn off the colorchange notification when in Auto mode.
Changing Map Detail
If QueMap appears too cluttered, tap the Map Detail drop-down menu to change the amount of detailed information that appears on the map. Note that changing map detail does not change the amount of detail stored in your iQue M5.
Off-Road Navigation
When you are traveling on roads, the iQue M5 shows your location on the nearest road to compensate for variations in GPS accuracy. Select At GPS Location when traveling off-road to customize your iQue M5 for off-road travel.
Viewing Map Information
Tap Manage to view the detailed maps currently stored on your iQue M5. You can view which map regions are installed and show or hide them. You can also delete your basemap or all detailed maps.
Tap to hide or expand maps.
Tap to hide/ show detailed map regions.
show map hide map
Tap Detailed Maps or Basemap and then tap Delete to remove them from your iQue.
38 iQue M5 Que Applications Guide
Changing Data Fields
On QueMap, you can customize the data fields that appear at the top of the screen by changing the color and the amount and type of fields that appear.
To customize data fields on QueMap:
1. From QueMap, tap the Show/Hide Data Fields icon to show the data fields, if necessary.
2. Tap and hold anywhere on the data fields and select Customize.
3. Drag the slider on the Colors tab to change the background color of the Data fields.
4. Tap the Mapping tab (these fields appear when you are navigating without an active route).
• Change the number of fields that appear on each row of Data fields. Check the boxes to show or hide the labels for each data field.
• Tap and hold on each data field at the top of the screen to change the contents of the data field.
C
USTOMIZING
> C
USTOMIZING THE
M
AP
5. Tap the Routing tab (these fields appear when you are navigating with an active route).
Then change the fields as described in the previous step.
6. To restore defaults, tap Default. When you are finished, tap Done. iQue M5 Que Applications Guide 39
C
USTOMIZING
> C
USTOMIZING THE
M
AP
Changing Zoom Options
For many different types of map items (lakes, parks, roads, and more), you can set a Max Zoom level—the maximum zoom level at which a map item appears on the map. For example, suppose you set the Max Zoom level for railroads to 0.5 miles. At zoom levels greater than 0.5 miles, no railroads will appear on the map. At zoom levels of 0.5 miles or less, the railroads appear.
You can also select the text size of map item labels.
To set advanced zoom options:
1. From QueMap, tap Menu and then
QuePreferences.
2. Tap Advanced on the Map tab.
3. For each area listed, select a Max Zoom level and a Text Size (if applicable) from the drop-down menus. Select Auto to allow the iQue M5 to choose the zoom level for an item automatically.
Select a zoom range and a text size for each type of map item. To turn off auto zoom or text labels for a map item, select Off.
40 iQue M5 Que Applications Guide
Customizing QueFind
QueFind displays up to nine search categories. You can streamline your searches by customizing the
QueFind page so that it contains the categories you use most often.
To customize QueFind:
1. From QueMap, tap the QueFind icon .
2. Tap Configure in the top right corner.
3. Select which categories you want to appear on
QueFind:
• To remove a category, tap a category in the list and then tap Remove Category.
• To add a category, first remove an unwanted category from the list (you can have only nine categories in the list at one time). Then tap Add Category and select the category you want to add.
• To rearrange the categories, tap a category in the list and then tap the arrows to move it up or down.
C
USTOMIZING
> C
USTOMIZING
Q
UE
F
IND
• To arrange the list automatically according to which categories you use most, tap Use
Habits.
• To reset to default (original) settings, tap Reset.
4. Tap Save to save your changes, or tap Cancel to exit without saving.
iQue M5 Que Applications Guide 41
C
USTOMIZING
> C
USTOMIZING FOR
N
AVIGATION
Customizing for Navigation
Changing navigation settings can help you create and use routes that fit your driving preferences. To change route settings, from QueMap tap Menu and then
QuePreferences. Then tap the Routing tab.
Off-Route Recalculation
When you stray from your route, the iQue M5 automatically recalculates your route from your current position. You can change or turn off automatic route recalculation if you wish.
Changing Guidance
By default, the iQue M5 plays audible voice directions and alerts for upcoming turns and GPS status changes.
Turn Preview—pop-up window appears to warn you about an upcoming turn.
Voice Prompts—plays voice directions for each turn.
Attention Tone—plays a tone to warn you about an upcoming turn.
Changing Route Calculation
The iQue M5 calculates routes according to the following criteria: faster time, shorter distance, or offroad (a straight-line route). You can also select a route calculation method each time you create a route (check the box next to Ask Me My Preference).
Changing Vehicle Type
Set your vehicle type so that the iQue M5 can calculate routes that best fit your driving needs.
Tap to change
Guidance.
Tap to change how routes are calculated.
Tap to set Avoids
Tap to change how routes are recalculated when off-route.
Tap to change your vehicle type.
Tap to change
Home Location
).
42 iQue M5 Que Applications Guide
Customizing Routes
You can customize the way the iQue M5 calculates routes by selecting the Custom calculation method in
Route Preferences. Select the types of roads you use most, or allow the iQue M5 to custom-calculate routes that best fit your driving habits.
To customize route calculation:
1. From QueMap, tap the QueRoutes icon .
Then tap Menu and Route Preferences.
2. Under Route Preference, tap Custom.
3. Tap and drag the slider bar for each road type to indicate whether you prefer or avoid traveling on that type of road.
4. Tap Use Habits to allow the iQue M5 to automatically determine the slider bar positions for each road type based on your driving habits.
Tap Reset to restore slider bar settings to their original positions.
iQue M5 Que Applications Guide
C
USTOMIZING
> C
USTOMIZING
R
OUTES
43
C
USTOMIZING
> C
USTOMIZING THE
Q
UE
B
UTTON
Customizing the Que Button
You can change which Que applications appear and the order in which they appear when you press the Que button. You can also program other iQue buttons to open one of the Que applications.
To change Que button settings:
1. From QueMap, tap and then Settings.
2. Tap Buttons and then the Advanced tab.
3. Check the boxes next to Que applications you want to display when you press the Que button.
4. To change the order of Que applications displayed, tap an application and then tap Move
Up or Move Down. Tap Reset to restore default settings.
To open Que applications with other buttons:
1. Tap the Program Buttons tab from within
Settings > Buttons.
2. Tap a button in the list.
3. From the Assign a program drop-down menu, choose the Que application or task you want to display when you press that button.
44 iQue M5 Que Applications Guide
Restoring Default Settings
If you have changed any Que settings, you can quickly revert back to the default (original) settings using the
Reset tab in QuePreferences.
To restore default (original) settings:
1. From QueMap, tap Menu and then
QuePreferences.
2. Tap the Reset tab.
3. Tap to place a check mark next to the settings you want to restore to default.
4. Tap Restore Defaults.
C
USTOMIZING
> R
ESTORING
D
EFAULT
S
ETTINGS iQue M5 Que Applications Guide 45
advertisement
Related manuals
advertisement
Table of contents
- 1 iQue® M5
- 3 Introduction
- 5 Getting Started
- 5 Opening the GPS Antenna
- 6 Acquiring Satellite Signals
- 7 Troubleshooting
- 8 Getting Started Tutorial
- 10 Basic Operation
- 10 Main Pages
- 11 Using QueMap
- 12 Using the Pan Toolbar
- 13 Finding Points & Creating Routes
- 14 Finding Cities
- 14 Finding Addresses
- 16 Finding Intersections
- 16 Finding Points of Interest
- 18 Recently-Found Places
- 19 Routing to a Map Point
- 20 Saving Routes
- 21 Tips for Navigating
- 22 Saving Locations
- 23 Saving a Home Location
- 24 Detailed Operation
- 24 Building Complex Routes
- 24 Adding Extra Stops
- 26 Taking Detours
- 26 Avoiding Roads and Areas
- 30 My Locations
- 30 Editing Locations
- 32 Organizing Locations
- 33 Routing to Contacts
- 35 Routing to Appointments
- 36 Using Additional Features
- 36 Measuring Distances
- 37 Using Track Logs
- 38 Viewing Trip Data
- 39 Viewing the Almanac
- 40 Customizing
- 40 Customizing System Settings
- 40 Changing Language
- 40 Changing GPS Mode
- 40 Changing Units
- 41 Customizing the Map
- 41 Changing Orientation
- 42 Changing Color
- 42 Changing Map Detail
- 42 Off-Road Navigation
- 42 Viewing Map Information
- 43 Changing Data Fields
- 44 Changing Zoom Options
- 45 Customizing QueFind
- 46 Customizing for Navigation
- 46 Changing Guidance
- 46 Changing Route Calculation
- 46 Off-Route Recalculation
- 46 Changing Vehicle Type
- 47 Customizing Routes
- 48 Customizing the Que Button
- 49 Restoring Default Settings
- 50 Appendix
- 50 About QueGPS
- 51 What is GPS?
- 52 Loading Detailed Maps
- 53 iQue M5 Messages
- 54 Vehicle Installation
- 56 Specifications
- 58 Product Registration
- 59 Software License Agreement
- 60 Warnings and Precautions
- 62 CE Compliance
- 63 FCC Compliance
- 64 Limited Warranty
- 67 Index