Messages
Messages such as the following may appear on the LCD monitor during camera operation.
Battery depleted
Built-in memory full
Memory card full
Memory card error
Card not formatted
Card locked
Compression error
The batteries are exhausted. Replace with new batteries. If
using rechargeable batteries, charge the batteries. (p.18)
The built-in memory/SD Memory Card is full and no more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
(p.22, p.100)
Change the quality level or recorded pixels of recorded
images and try again. (p.107)
Shooting and playback are impossible due to a problem with the SD Memory Card. You may be able to display or copy the images on the card using a PC.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is
not compatible with this camera. (p.131)
The SD Memory Card is write-protected. (p.24)
This message appears when compression of images has failed. Change the quality level/size and record or save again.
No image/sound
Deleting
There are no image/sound files on the SD Memory Card.
This message appears when the camera is deleting an image or sound file.
Camera cannot play this image and sound
You are trying to play back an image or sound in a format not supported by this camera. You may be able to play it back on another brand of camera or your computer.
Image folder could not be created
Protected
The largest file number (9999) has been assigned to an image in the largest folder number (999) and no more images can be saved. Insert a new SD Memory Card or
format the card. (p.131)
The image or sound file you are trying to delete is protected.
Data being recorded
Data being processed
This message appears when you try to switch to Q mode while an image is still being recorded, or when the protect setting or DPOF setting is being changed. It disappears after the image is recorded or the setting is changed.
This message appears when the camera takes more than five seconds to display an image due to image processing, or when the SD Memory Card or built-in memory is being formatted.
9
151
9
Green mode must be canceled to use this function.
No image to be processed
This image/sound cannot be processed
This function is not available in Green Mode. Press the
Green button to cancel Green Mode. (p.48)
This message appears when no image/sound file is present.
This message appears when you attempt to edit a file that cannot be processed.
No card in the camera
This message appears when you select [Image/Sound
Copy] with no SD Memory Card inserted.
The card memory is not enough to copy images/ sounds
The built-in memory is not enough to copy images/sounds
This message appears when there is not enough memory on the SD Memory Card or in built-in memory to copy image/sound to. Insert a new SD Memory Card or delete
unwanted images. (p.22, p.100)
Cannot process correctly
This message appears when Red-eye Compensation cannot be performed correctly.
Messages such as the following may appear on the LCD monitor when using the PictBridge function.
No paper in the printer There is no paper in the printer.
No ink in the printer There is no ink in the printer.
Printer error
Data error
Paper stuck in the printer
An error message has been sent from the printer.
A data error message has been sent from the printer.
The paper is stuck in the printer.
152
