Vodafone Digital TV User Guide

Getting started

Connecting to Digital TV Recorder

As standard there will be two connections required for the signal from our service, one a circular F-type coaxial connector to be connected to ‘RF IN’ and the other an ethernet data cable to be connected to ‘LAN 0’ using an RJ-45 type connector. Both of these connections are to be found on the rear panel of the box.

Connecting to your TV

Depending on the TV/DVD/audio equipment to be connected, different types of connections can be used. Most HD TV’s will use the HDMI connection, but the composite (RCA) audio and video connectors can also be used if preferable. For future reference please become familiar with the connectors used and note which cables are connected e.g. if moving the equipment, or checking connectivity during any troubleshooting exercises.

Connecting to the power supply

The Digital TV Recorder is supplied with an external power adapter. Plug the 12v DC barrel type connector into the box and the other end to the mains power supply.

RF IN

COMPONENT VIDEO OUT

OPTICAL AUDIO OUT

ANT IN RF OUT

RF IN: Signal input from Vodafone

VIDEO OUT AUDIO OUT S-VIDEO OUT

HDMI connection to/

from HD TV (preferred for HD TV)

HDMI

LAN 1

LAN 0

“DOLBY” is a Trademark of Dolby

Laboratories

1992 - 1997 DOLBY LABORATORIES, INC

Compliant with H.264, AAC

USB RESET 12VDC - 3.5A

Ethernet cable from our box management

Power input from external power adapter

Digital TV Recorder User Guide Page 8