3. Using the phone. Motorola C1214A, C1211A, C12A, C1213A

17

3. Using the phone

NOTE

Your handset will automatically time the duration of all external calls. The call timer will display after the first 15 seconds of your call. When the call ends, the total duration of your talk time is shown for 5 seconds.

3.1 Switch the handset on / off

Press and hold to switch the handset on or off.

3.2 Calls

3.2.1 Make a call

1. Press .

2. When you hear the dial tone, dial the number.

3.2.2 Preparatory dialling

1. Dial the number first. If you make a mistake press the last digit.

2. Press to dial.

to delete

NOTE

To enter a pause (P) when pre-dialling, see page 22.

3.2.3 End a call

Press , or place the handset back on the base or charger.

3.2.4 Receive a call

When you receive an external call, the phone rings and the display.

icon flashes on

1. If the handset is off the base then press to answer the call, or if the handset is on the base simply lift the handset to answer the call.

NOTE

If you prefer to press when you lift up the handset to answer a call, you will need to switch Auto answer off, see page 24.

3.3 Adjust the earpiece volume

During a call, press or to increase or decrease the volume. There are 5 levels to choose from.

Using the phone