1.5.2 CPU Fan Installation with P4 Fan Base. Acorp 4S648N, 4S648

Chapter 1 Motherboard 4S648/4S648N

1.5.2 CPU Fan Installation with P4 Fan Base

1. P4 CPU Fan is typically designed with 4 latches and mounted with a thick heatsink. Please do not use other type of CPU fan which cannot match the P4 Fan base on board.

2. Install the P4 CPU fan into the Fan base in such a way that the 4 latches of the CPU Fan match with the 4 Supporters of the CPU Fan Base.

3. Press down the latches to lock CPU Fan to the Fan Base.

4. Then connect the Fan Power Cable to one of the Fan connectors on board.

5. Make sure that the Fan Power Cable is correctly connected to Fan Connector.

Fan Connector for Fan Power Cable

4 Latch-supporters

Socket 478

SiS

648

RTL

8100BL

Mainboard

SiS

963L

W83

Fan Base

1-13